264,24 EURbez VAT · VAT importowy i cła przy dostawie
189,36EUR
w magazynie · 1bez VAT · VAT importowy i cła przy dostawie · koszt dostawy wyliczany przy zamówieniu
- Dostawa do 97 krajów
- Oryginalna część producenta
- Wysyłka w 24 h dla pozycji magazynowych
Opis
The ACV Turbulator 50423059 is a set of 16 turbulators, each 750 mm long, designed for use in ACV CA 100 series heat exchangers. These components are installed in the flue gas passages to create turbulence, slowing the flow and increasing heat transfer efficiency. The set is compatible with CA 100 Standard, Compact, Eco, Comfort, and V2 models. The article number is 129.841.004.
Dodatkowe informacje
| Compatible with | CA 100 standard, CA 100 compact, CA 100 eco, CA 100 comfort, CA 100 v2 |
|---|---|
| Design features | Components installed in flue gas passages to create turbulence, slowing flow and increasing contact time with heat transfer surfaces |
| Maintenance requirement | Check condition of flue tube inner surfaces and gaskets; clean heat exchanger during replacement; inspect for corrosion in condensing appliances |
| Material options | Stainless steel, aluminium alloy, or copper |
| Mounting feature | Sit directly inside each flue tube, held in place by tube geometry or retaining bracket |
Dobór i montaż
Turbulators of this type are selected based on the specific dimensions of the flue passages, including length, diameter, and the number of tubes in the heat exchanger. They are typically held in place by tube geometry or a retaining bracket. Before ordering, measure the flue tube length and diameter, and confirm the number of tubes to ensure the set quantity matches. During installation, check the condition of the flue tube inner surfaces and any gaskets, and clean the heat exchanger if scaling or soot is present.
Objawy awarii
When turbulators fail or degrade, the boiler's thermal efficiency may decrease, leading to higher fuel consumption and reduced heat output. Soot accumulation on the gas side or scaling on the water side can exacerbate performance issues. In condensing boilers, corrosion may occur where condensate pools near the turbulator ends. Inspect turbulators for damage, deformation, or blockage, and clean or replace them as needed.
Pasuje do urządzeń
ACV CA 100 CA 100 Standard CA 100 Compact CA 100 Eco CA 100 Comfort CA 100 V2
Wszystkie parametry
| Długość | 750 mm |
|---|---|
| Ilość zadana | 16 pc |
Numery części
| SKU | 50423059 |
|---|---|
| Additional article | 129.841.004 |
Podobne części
349,02 EURbez VAT · VAT importowy i cła przy dostawie
—na zapytanie
