EBM PAPST Centrifugal fan RG175/2000-3633-010204 55667.14001

Name: EBM PAPST Centrifugal fan RG175/2000-3633-010204 55667.14001
Brand: EBM PAPST
SKU: 55667.14001
Price: 1263.24 EUR
Availability: InStock

SKU 55667.14001 Model RG175/2000-3633-010204 Brand EBM PAPST

Brand EBM PAPST

Buy EBM PAPST Centrifugal fan RG175/2000-3633-010204 55667.14001

Key specifications

Manufacturer part number	55667.14001

all specifications (1) ↓

1044.00EUR

in stock · 1

excl. VAT · import VAT and duties on delivery · shipping calculated at checkout

Delivery to 97 countries
Original manufacturer part
Dispatch within 24 h for stocked items

Description

The EBM PAPST RG175/2000-3633-010204 (SKU 55667.14001) is a centrifugal fan designed for use in boilers, burners, and industrial thermal equipment. It supplies combustion air to the burner and, in sealed appliances, expels flue gases. The fan's speed is controlled by the burner control to modulate firing rate, ensuring correct air-fuel ratio. This model is identified by manufacturer part number 55667.14001.

Further details

Air pressure switch	an air pressure switch downstream confirms that airflow is present before ignition is allowed
Connection to burner control	connected to the burner control which issues the start and speed commands
Function	supply combustion air to the burner and, in room-sealed appliances, also drive the flue gases out of the heat exchanger
Modulating operation	in modulating premix boilers, the fan's speed determines the firing rate: the burner control varies the fan speed and the gas valve follows to maintain the correct air-fuel ratio
Replacement verification	correct replacement requires verifying the part number against the original fan and checking that all electrical and mechanical interfaces match the existing installation
Speed signal use	the fan speed signal is used by the gas valve or air damper actuator to adjust fuel and air proportionally
Typical failure modes	worn bearings, imbalance caused by deposits on the impeller blades, a failed starting or run capacitor, and speed feedback errors that the boiler control interprets as an airflow fault, often leading to a lockout

Choosing and fitting

When selecting a replacement centrifugal fan of this type, verify the required air flow and pressure, outlet direction, impeller diameter, supply voltage, and control mode (mains on/off, PWM, or 0-10 V analogue). The flange pattern must match the burner or boiler mounting. Check that all electrical and mechanical interfaces align with the existing installation.

Signs of failure

Typical failure modes include worn bearings, imbalance from deposits on impeller blades, failed start or run capacitors, and speed feedback errors. These issues may cause the boiler control to interpret an airflow fault, leading to lockout. Check for unusual noise, vibration, or error codes related to airflow.