Brahma Control box 18094000

The Brahma Control box 18094000 is a safety control box for oil burners, designed for two-flame operation. It operates on a 220 V supply voltage with a power consumption of 6.5 W. The device features two independent safety contacts and is compatible with FC7/FC8 solar cell flame detectors. It has a protection class of IP40, weighs 0.24 kg net, and measures 9.8x8.5x6.5 cm. The control box has a service life of 250,000 cycles under maximum load and requires an external fuse of 4 A.

When selecting a control box of this type, ensure the supply voltage matches the burner system (e.g., 220 V). Verify the flame detector type (e.g., FC7/FC8) and the number of safety contacts required. The physical dimensions and mounting base must be compatible with the existing burner housing. Always compare the external fuse rating and power consumption with the system's specifications before installation.

Common failures in control boxes of this kind include failure to ignite, intermittent shutdowns, or no response to flame loss. If the equipment does not start or locks out, check the external fuse, wiring connections, and the flame detector signal. A faulty control box may also cause the burner to cycle repeatedly or fail to enter the pre-purge phase.