Brahma Flame relay RE3 10801025

The Brahma RE3 flame relay (SKU 10801025) is a microprocessor-based control box that monitors flame presence in gas and combination burners. It converts signals from an ionization electrode or UV sensor into a discrete on/off output via built-in relays. The device complies with safety standard EN 60730 and supports flame detection via ionization, UV, and IR methods. It features two LEDs for power and flame signal indication.

Parts of this type are selected by exact series and type designation, supply voltage, safety and pre-purge times, flame detection method (ionisation, UV, or IR), and base or plug pattern. A control is normally not interchangeable across series even within one brand; a mismatched safety time is a safety issue. When replacing, ensure the new unit matches the original in all these parameters, as the control box is the central logic of the burner system.

Items of this kind may fail due to relay wear, sensor signal loss, or internal component failure. Symptoms include the burner not igniting, frequent lockouts, or the flame signal LED not lighting despite a stable flame. Check the flame sensor, wiring, and supply voltage before suspecting the control box.