882.00 EURexcl. VAT · import VAT and duties on delivery
Honeywell Gas valve VR4615VB1022U
Brand Honeywell
Key specifications
| Max. inlet pressure | 60 mbar |
|---|---|
| Connection thread | flange |
| Solenoid configuration | two electrical actuators |
| Safety feature | valve closes on power failure |
| Diaphragm diameter | 2.8 mm |
| Inlet and outlet diameter | 23 mm |
| Regulator standard | v4346a 1006 (45.801.155-001) |
| Leakage requirements | according to en126 |
| Nominal inlet gas pressure | 25 mbar |
| Pressure sensor pipe diameter | 0.5 inch |
| Operating position | vertical |
| Maximum inlet pressure | 60 mbar |
| Maximum operating pressure | 60 mbar |
| Ambient pressure | 1013 mbar |
| Built-in filter | internal fine-mesh filter |
| Throttle valve regulation | with throttle |
| Design features | positive feedback system |
| Input screen | on the input side |
| Two electrical devices | two electrical actuators |
| Coil connection | top connection |
| Control type | positive feedback system |
| Barcode standard | alternating 2/5, DIN EN 801 |
| Pressure test points | pressure testing nipple |
| Back pressure (1st valve) | 50 mbar |
| Mounting feature | two threaded mounting holes |
| Optional output filter | output mesh filter on request |
| Pressure measuring fittings | outer diameter 9 mm |
| Regulator spring lock | regulator spring can be locked |
| Ignition systems supported | dsi, hsi or ip |
| Power options | mains or low-voltage |
| Flow indication | m3/h |
| Pressure drop | 10 mbar |
| Maximum air pressure (before ignition) | 8 mbar |
| Maximum air pressure (after ignition) | 20 mbar |
| Output aperture diameter | 2.8 mm |
| Connection type | flanged connection |
| Actuator type | two-position tracking type |
| Electrical connection | DIN connector, AMP compatible |
| Pressure measuring points | on inlet and outlet sides |
| Compression fitting | present |
| Pilot flow | present |
| Flow capacity | 8.1 m³/h |
| Certification | CE |
Lowest price in the 30 days before the price drop
230.64EUR
in stock · 6excl. VAT · import VAT and duties on delivery · shipping calculated at checkout
- Delivery to 97 countries
- Original manufacturer part
- Dispatch within 24 h for stocked items
Description
This gas valve (Honeywell VR4615VB1022U) has flanged connections with a 23 mm diameter. It regulates gas flow in heating systems and is compatible with DSI, HSI, and IP ignition systems. The valve works at a nominal inlet pressure of 25 mbar and a maximum pressure of 60 mbar, and has a flow capacity of 8.1 m³/h at a 10 mbar pressure drop. It employs two electrical actuators and closes on power failure, and features an internal fine-mesh filter, throttle, and pressure testing nipple. It is CE certified, complies with EN126, and is intended for Wolf equipment.
Further details
| Application | domestic heating systems, heaters, boilers and water heaters |
|---|---|
| Closing Variants | b+ b, b + j, b+c, a+ j and a+c |
| Control Features | two-level regulation and modulation of gas flow |
| Gas Type | petroleum gases mfd group a (g110), mfd group b (g 120), natural gas h (g 20), natural gas l (g25) and liquefied gas lp (g30) |
| Operating Principle | automatic control of gas outlet pressure using built-in positive feedback system |
| Output Pressure Stability | stable outlet pressure, regardless of changes in inlet pressure |
| Valve Classification | safety valve class a/b, main valve class b/c/j |
All specifications
| Max. inlet pressure | 60 mbar |
|---|---|
| Connection thread | flange |
| Solenoid configuration | two electrical actuators |
| Safety feature | valve closes on power failure |
| Diaphragm diameter | 2.8 mm |
| Inlet and outlet diameter | 23 mm |
| Regulator standard | v4346a 1006 (45.801.155-001) |
| Leakage requirements | according to en126 |
| Nominal inlet gas pressure | 25 mbar |
| Pressure sensor pipe diameter | 0.5 inch |
| Operating position | vertical |
| Maximum inlet pressure | 60 mbar |
| Maximum operating pressure | 60 mbar |
| Ambient pressure | 1013 mbar |
| Built-in filter | internal fine-mesh filter |
| Throttle valve regulation | with throttle |
| Design features | positive feedback system |
| Input screen | on the input side |
| Two electrical devices | two electrical actuators |
| Coil connection | top connection |
| Control type | positive feedback system |
| Barcode standard | alternating 2/5, DIN EN 801 |
| Pressure test points | pressure testing nipple |
| Back pressure (1st valve) | 50 mbar |
| Mounting feature | two threaded mounting holes |
| Optional output filter | output mesh filter on request |
| Pressure measuring fittings | outer diameter 9 mm |
| Regulator spring lock | regulator spring can be locked |
| Ignition systems supported | dsi, hsi or ip |
| Power options | mains or low-voltage |
| Flow indication | m3/h |
| Pressure drop | 10 mbar |
| Maximum air pressure (before ignition) | 8 mbar |
| Maximum air pressure (after ignition) | 20 mbar |
| Output aperture diameter | 2.8 mm |
| Connection type | flanged connection |
| Actuator type | two-position tracking type |
| Electrical connection | DIN connector, AMP compatible |
| Pressure measuring points | on inlet and outlet sides |
| Compression fitting | present |
| Pilot flow | present |
| Flow capacity | 8.1 m³/h |
| Certification | CE |
Part numbers
| SKU | VR4615VB1022U |
|---|---|
| Additional article | 534.331.098 |
| Model | VR4615VB1022 |
| Type designation | V4346A 1006 |
| Type designation | 45.801.155-001 |
Similar parts
196.50 EURexcl. VAT · import VAT and duties on delivery
