Delavan Nozzle adapter 28736-003 is a short nozzle adapter with a 1/4 thread size, designed for use in Delavan forced-draught burners. It connects the oil nozzle to the oil supply line, holding the nozzle in the correct position for atomisation. The shortened body is suitable for limited space in the blast tube. Catalogue number: 345.106.004.
Further details
Alignment requirement
thread, seal and projection must align with the burner's oil line and combustion head geometry
Damage consequence
leakage or misalignment of the spray pattern, leading to sooting, pulsation or unstable ignition
Replacement check
adapter should be checked for thread condition and seating
Spray Pattern
S, B, H, W, HO, ES
Choosing and fitting
Parts of this type are selected by thread size and overall length. The thread must match both the nozzle and the oil line, and the length must position the nozzle face correctly relative to the combustion head air vanes. Before ordering, measure the available space in the blast tube and compare the adapter's thread and length with the existing one.
Signs of failure
A damaged or worn adapter can cause fuel leakage or misalignment of the spray pattern, leading to sooting, pulsation, or unstable ignition. Check the adapter's thread condition and seating when replacing a nozzle.