498.60 EURexcl. VAT · import VAT and duties on delivery
Brahma PCB (control board) 1966.BA1.00.01 16027100
Brand Brahma
no photo yetKey specifications
| Boiler power range | 50–250 kW |
|---|---|
| Ignition type | pilot and direct ignition |
| Weather compensation | with weather compensation |
| Modulation | with modulation |
| Flame safeguard role | conventional burner control (flame safeguard) |
| Pre-purge function | initiates pre-purge |
| Fan control | starts the fan |
| Gas valve control | opens the gas valve |
| Pump drive | drives the circulation pump |
| Factory programmed | factory-programmed for the intended model |
258.80EUR
on orderexcl. VAT · import VAT and duties on delivery · shipping calculated at checkout
- Delivery to 97 countries
- Original manufacturer part
- Dispatch within 24 h for stocked items
Description
Brahma PCB (control board) 1966.BA1.00.01 16027100 is an electronic control board for Brahma boilers with a power range of 50–250 kW. It supports both pilot and direct ignition, and includes weather compensation and modulation. The board performs the role of a conventional burner control (flame safeguard), managing the ignition and safety sequence. It initiates pre-purge, starts the fan, opens the gas valve, and drives the circulation pump. This board is factory-programmed for the intended model.
Further details
| Field adjustment | field adjustment of safety parameters is not normally possible |
|---|---|
| Function | perform the same role as a conventional burner control (flame safeguard) |
| Lockout on fault | goes to lockout if the flame is not proved within the safety time |
| Model specific matching | matched to the specific boiler model |
| Replacement verification | verify the board's part number against the boiler's original specification |
| Selection criteria | based on the exact series and type designation, supply voltage, safety time, pre-purge time, and the flame detection method |
| Temperature response | responds to temperature sensors for modulation |
Choosing and fitting
Parts of this type are selected by matching the exact series and type designation, supply voltage, safety time, pre-purge time, and flame detection method. The board's base or plug pattern must match the boiler's wiring harness. A board from a different series, even within the same brand, is not interchangeable. Always verify the board's part number against the boiler's original specification before ordering.
Signs of failure
When items of this kind fail, the boiler may not start or may lockout without ignition. The fan may not run, or the gas valve may not open. Check the board for visible damage, loose connections, or blown fuses. Verify that the flame signal is detected correctly and that all sensors are functioning.
All specifications
| Boiler power range | 50–250 kW |
|---|---|
| Ignition type | pilot and direct ignition |
| Weather compensation | with weather compensation |
| Modulation | with modulation |
| Flame safeguard role | conventional burner control (flame safeguard) |
| Pre-purge function | initiates pre-purge |
| Fan control | starts the fan |
| Gas valve control | opens the gas valve |
| Pump drive | drives the circulation pump |
| Factory programmed | factory-programmed for the intended model |
Part numbers
| SKU | 16027100 |
|---|---|
| Additional article | 246.568.023 |
| Model | 1966.BA1.00.01 |
| Type designation | SCH.1966.BA1.00.01 |
Similar parts
168.72 EURexcl. VAT · import VAT and duties on delivery
145.20 EURexcl. VAT · import VAT and duties on delivery
223.20 EURexcl. VAT · import VAT and duties on delivery
45.00 EURexcl. VAT · import VAT and duties on delivery
363.96 EURexcl. VAT · import VAT and duties on delivery
