Brahma Gas solenoid valve E6G*SR10*1/2*GMO 13762002

This gas solenoid valve is normally closed and has a brass body. It is rated for 230 V and 50–60 Hz, consumes 20 W, and is classified as Class A. The valve has a 1/2-inch connection thread, a 15 mm nominal diameter, a 10 mm nozzle, and a flow capacity of 3.9 m³/h. It can be installed vertically or horizontally, opens and closes in 1 s each, opens quickly and silently, is wired via a terminal block, and its flow direction is marked by an arrow on the body; it weighs 700 g and has IP54 protection.

Replacement gas valves of this type must be selected by checking the supply voltage and frequency, connection thread, and pipe nominal diameter against the existing installation. Before mounting, confirm that the arrow on the valve body points in the flow direction. The valve may be installed vertically or horizontally, and electrical wiring is done through a terminal block. Verify that the ingress protection rating and terminal connections are suitable for the environment.