Brahma Connector 80341340

The Brahma Connector 80341340 is a 4. 8x0. 8 mm spade terminal connector used to terminate high-voltage ignition cables or link them to ignition transformer output terminals or ignition electrodes. It is silicone-insulated to withstand high voltage and heat in burner environments. This connector is designed for precise control of gas burner valves, providing opening and closing when voltage is applied. Its construction is resistant to vibration and features durable insulation.

Parts of this type are selected by matching the spade terminal width and thickness (e.g., 4.8x0.8 mm) to the transformer's tab size exactly. The connector is typically supplied loose and requires crimping or soldering onto the cable; ensure the crimp is mechanically secure and all strands are fully captured. Before ordering, verify the terminal dimensions and inspect the ignition cable for cracks or hardening.

A loose or oxidised contact can cause a weak spark or intermittent ignition, which may be mistaken for a failing transformer. Damaged insulation or cable cracks can leak the spark to earth, leading to flame failure lockout. Check the connector for corrosion, looseness, and the cable for damage.