Brahma Solenoid coil BE6*GMO 18811001

The Brahma Solenoid coil BE6*GMO 18811001 is a valve coil designed for precise control of gas burner valves. It ensures opening and closing of valves when voltage is applied, with high heat resistance and durable insulation. This coil is a component used with gas valves that shut off and meter gas supply to a burner, acting as the electromagnetic actuator that lifts the valve seat to allow gas flow when energised by the burner control. It is typically replaceable separately from the valve body, allowing for a swap without replacing the entire valve assembly.

Parts of this type are selected by matching the coil voltage (commonly 230 V or 24 V AC/DC) and the physical mounting pattern and plunger stroke to the valve body. Ensure the coil's electrical rating matches the burner control output and that the mechanical interface is compatible with the existing valve. These coils are used in single and double solenoid configurations, as well as in slow-opening or servo-regulated gas valves.

Common failure modes include coil burnout from overheating or prolonged energisation, which may cause the valve to fail to open or close properly. When a coil fails, the burner may not ignite or may shut down unexpectedly. Check the coil for signs of burning or damage, and inspect the valve seat and o-rings when replacing the coil.