excl. VAT · import VAT and duties on delivery
· shipping calculated at checkout
Delivery to 97 countries
Original manufacturer part
Dispatch within 24 h for stocked items
Description
Siemens SKP15.000E2 is an actuator for Siemens SKP gas valves. It accepts three control signal types: three-point, 0-10 V, and on/off. The actuator converts these signals into rotary motion to open, close, or modulate the valve.
Further details
Application
position air dampers and mixing valves
Operating Principle
translates a control signal into rotational movement
Choosing and fitting
Actuators of this kind are selected by matching torque output, full-stroke running time, control signal type, shaft/coupling pattern, rotation angle, and auxiliary switches. Before installation, verify the mounting interface and rotation direction against the existing valve assembly. The valve stem must move freely; inspect it before fitting the new actuator.
Signs of failure
Typical failures include stripped gears, a failed end switch, or a seized valve stem in seasonal equipment. The actuator may run without turning the valve, the controller may not receive end-position feedback, or the valve may not move at all. Check for free valve movement before assuming actuator failure.
Cuenod C100 GX507/8
