Brahma Gas solenoid valve 13763802

The Brahma 13763802 E6G*SRP10*1/2*GFD5 is a normally closed gas solenoid valve with a 1/2-inch connection thread. It operates on 230 V AC at 50–60 Hz, with a built-in bridge rectifier circuit allowing control via DC signal. The valve features quick, silent opening and closing times of 1 second each, and is made of brass. It is certified to EN161 and complies with directives 90/396 and 93/68, suitable for domestic and industrial installations. The valve can be installed vertically or horizontally and includes a flow adjustment mechanism.

When selecting a gas solenoid valve of this type, ensure the connection thread size, supply voltage, and frequency match the system requirements. The valve body material and certification standard (e.g., EN161) must be compatible with the application. Installation should follow the arrow on the body for correct flow direction, and the valve must be mounted without displacing the protective shell, using a proper hex key. The inlet pressure must not exceed the rated pressure indicated on the valve.

Common failure modes for gas solenoid valves include coil burnout, sticking due to debris, or diaphragm damage, leading to failure to open or close properly. Symptoms may include no gas flow when the valve should be open, or gas flow when it should be closed, causing burner ignition issues or unsafe operation. Check for continuity in the coil, ensure the valve is clean, and verify that the inlet pressure is within specifications.