Brahma Ignition transformer TCD2FA 15930060

This high-frequency electronic ignition transformer is made for gas and liquid fuel burners. It supplies a 9 kV secondary voltage at 10–12 kHz and a 26 kV ignition voltage, with a two-pole output and a maximum ignition cable length of 1.5 m. Operating at 230 V, 50–60 Hz, it consumes 29 W and is rated for a 33% duty cycle. The unit has a built-in varistor, an integrated EMC filter, and built-in short-circuit protection, and is suitable for domestic, commercial and industrial installations. It weighs 0.25 kg.

Parts of this type are selected by supply voltage, mains frequency, power rating, duty cycle, secondary voltage, and by the mechanical and electrical connections of the appliance. Before ordering, measure the mounting hole spacing and compare the connector systems; the high-voltage output may be single or double pin and the primary side may use a triangular connector or a 6.35×0.8 spade connector. Some aftermarket parts in this category share the physical envelope of TC/TD-series units and can therefore replace most other manufacturers' transformers where mounting and terminal arrangements correspond.