Name: Delavan Oil nozzle 4.50GPH,60W 00450-60W7
Brand: Delavan
SKU: 00450-60W7

Key specifications

Flow rate

4.5 GPH

Spray angle

60 °

Spray pattern

Actuator type

nozzle

Replacement interval

annual service

Component type

nozzle

Manufacturer code

00450-60W7

Device type

oil nozzles

all specifications (8) ↓

Description

The Delavan oil nozzle 00450-60W7 is a precision consumable component used in oil-fired burners. It atomizes fuel into a fine spray cone for efficient combustion, with a flow rate of 4.5 GPH (gallons per hour), a spray angle of 60 degrees, and a W (solid) spray pattern. This nozzle is designed for annual replacement during routine service to maintain burner performance. It is identified by manufacturer code 00450-60W7 and OEM equivalent 3042187.

Nozzle selection chart

Flow rate	kg/h	45°	60°	70°	80°	90°
0.30	0.95		B
0.40	1.27	B	B W		B
0.50	1.59	W	A B E W		A W
0.55	1.75		B W		W
0.60	1.91	W	B E W	W	W
0.65	2.07	W	B E W		W
0.70	2.23		B W
0.75	2.38	A B W	B W		A W
0.80	2.54		W
0.85	2.70	W	B W	A	A W
0.90	2.86		B W		A
1.00	3.18	W	B W
1.10	3.50	AR	AR B W	AR	AR W
1.20	3.82		B W
1.25	3.97	W	B W		W
1.35	4.29	W	A B W			A
1.50	4.77	A W	A B W		W
1.65	5.25	W	B W
1.75	5.56		B W
2.00	6.36	W	B W		W
2.25	7.15	W	B W
2.50	7.95	W	B W
2.75	8.74	W	B W
3.00	9.54	W	B W			B
3.25	10.33		B W			B
3.50	11.13	A	B W			B
3.75	11.92		B W			B
4.00	12.72		B W		B	B
4.50	14.31	B	B W		W	B
5.00	15.90	W	B W			B
5.50	17.49	B	B W
6.00	19.08	B	B W
6.50	20.67	B W	B W
7.00	22.26		B W
7.50	23.85	B W	B W
8.00	25.44	B W	B W
8.50	27.02	B	B		B
9.00	28.61	B	B		B
9.50	30.20	B	B		B
10.00	31.79	B	B		B
11.00	34.97		B		B
12.00	38.15		B		B
13.00	41.33		B W
14.00	44.51	B	A B
15.00	47.69		A B
17.00	54.05		B
18.00	57.23	A	B
19.00	60.41		B
20.00	63.59	B	B		B
22.00	69.95	B	B		B BPS
24.00	76.31	B	A B		B BPS
26.00	82.66	B	B		B
28.00	89.02	B	B		B
30.00	95.38	B	B		B
32.00	101.74	B	B		B
35.00	111.28	B	B		B
40.00	127.18	B	B		B
45.00	143.07	B	B		B
50.00	158.97	B	B		B

Function

atomize fuel into fine spray for combustion

Nozzle Type

Choosing and fitting

Oil nozzles of this type are selected by matching three key parameters to the burner's data plate: flow rate (in US gallons per hour), spray angle (typically between 30° and 80°), and spray pattern (hollow, solid, or semi-solid). The thread size must also be compatible with the burner adapter. Before ordering, verify these specifications against the burner manufacturer's requirements. Installation involves careful handling to avoid damaging the orifice, as any damage alters the spray geometry.

Signs of failure

When oil nozzles of this kind fail or are incorrectly matched, common symptoms include sooting, pulsation, or ignition failure. A nozzle with the correct flow but wrong pattern can cause incomplete combustion, leading to carbon buildup or unstable flame. Regular inspection during annual service is recommended to detect wear or blockage, which may manifest as reduced heating efficiency or increased fuel consumption.

All specifications

Flow rate

4.5 GPH

Spray angle

60 °

Spray pattern

Actuator type

nozzle

Replacement interval

annual service

Component type

nozzle