Name: Delavan Oil nozzle 2.00GPH,80W 00200-80W4
Brand: Delavan
SKU: 00200-80W4

Flow rate

2 GPH

Spray angle

80 °

Spray pattern

Choose a nozzle by its marks

Nozzles of different brands interchange when the marks match: Flow rate, Spray angle, Spray pattern. Set them as on the old nozzle — below are the ones that fit, with price and stock.

Description

This is an oil nozzle with a flow rate of 2 GPH, a spray angle of 80 °, and a W spray pattern. It is identified by SKU 00200-80W4 and is made by Delavan. The nozzle atomises fuel oil for combustion in an oil burner. The 80 ° angle and W pattern determine the shape and spread of the oil spray leaving the nozzle.

Nozzle selection chart

Flow rate	kg/h	45°	60°	70°	80°	90°
0.30	0.95		B
0.40	1.27	B	B W		B
0.50	1.59	W	A B E W		A W
0.55	1.75		B W		W
0.60	1.91	W	B E W	W	W
0.65	2.07	W	B E W		W
0.70	2.23		B W
0.75	2.38	A B W	B W		A W
0.80	2.54		W
0.85	2.70	W	B W	A	A W
0.90	2.86		B W		A
1.00	3.18	W	B W
1.10	3.50	AR	AR B W	AR	AR W
1.20	3.82		B W
1.25	3.97	W	B W		W
1.35	4.29	W	A B W			A
1.50	4.77	A W	A B W		W
1.65	5.25	W	B W
1.75	5.56		B W
2.00	6.36	W	B W		W
2.25	7.15	W	B W
2.50	7.95	W	B W
2.75	8.74	W	B W
3.00	9.54	W	B W			B
3.25	10.33		B W			B
3.50	11.13	A	B W			B
3.75	11.92		B W			B
4.00	12.72		B W		B	B
4.50	14.31	B	B W		W	B
5.00	15.90	W	B W			B
5.50	17.49	B	B W
6.00	19.08	B	B W
6.50	20.67	B W	B W
7.00	22.26		B W
7.50	23.85	B W	B W
8.00	25.44	B W	B W
8.50	27.02	B	B		B
9.00	28.61	B	B		B
9.50	30.20	B	B		B
10.00	31.79	B	B		B
11.00	34.97		B		B
12.00	38.15		B		B
13.00	41.33		B W
14.00	44.51	B	A B
15.00	47.69		A B
17.00	54.05		B
18.00	57.23	A	B
19.00	60.41		B
20.00	63.59	B	B		B
22.00	69.95	B	B		B BPS
24.00	76.31	B	A B		B BPS
26.00	82.66	B	B		B
28.00	89.02	B	B		B
30.00	95.38	B	B		B
32.00	101.74	B	B		B
35.00	111.28	B	B		B
40.00	127.18	B	B		B
45.00	143.07	B	B		B
50.00	158.97	B	B		B

Choosing and fitting

Nozzles of this type are selected by matching the flow rate, spray angle, and spray pattern to the burner manufacturer's specification. The mounting thread and nozzle body dimensions must also match the nozzle holder on the burner. Before ordering, compare the markings on the old nozzle with the required values for the appliance. The spray pattern letter and angle must be correct for the combustion chamber shape and air flow.

Signs of failure

Nozzles of this kind can clog, wear at the orifice, or develop a distorted spray pattern over time. When this happens, the burner may produce a smoky flame, run roughly, fail to ignite, or show a change in combustion readings. Inspect the nozzle for blockage or damage and compare the spray pattern with the specified angle and pattern before replacement.