Name: Delavan Oil nozzle 30609-043
Brand: Delavan
SKU: 30609-043
Price: 49.39 EUR
Availability: InStock

Key specifications

Spray pattern

solid cone

Body material

brass

Fuel

fuel oil

Actuator type

nozzle

Component type

nozzle

Device type

oil nozzle

all specifications (6) ↓

Choose a nozzle by its marks

Nozzles of different brands interchange when the marks match: Flow rate, Spray angle, Spray pattern. Set them as on the old nozzle — below are the ones that fit, with price and stock.

Description

The Delavan Oil nozzle 30609-043 is a solid cone oil nozzle designed for atomizing fuel oil into fine particles at low air pressure. It is made of brass and is suitable for use with fuel oil, including waste oils. The nozzle features large flow passages to prevent clogging and is intended for use in oil-fired burners to ensure complete combustion.

Nozzle selection chart

Flow rate	kg/h	45°	60°	70°	80°	90°
0.30	0.95		B
0.40	1.27	B	B W		B
0.50	1.59	W	A B E W		A W
0.55	1.75		B W		W
0.60	1.91	W	B E W	W	W
0.65	2.07	W	B E W		W
0.70	2.23		B W
0.75	2.38	A B W	B W		A W
0.80	2.54		W
0.85	2.70	W	B W	A	A W
0.90	2.86		B W		A
1.00	3.18	W	B W
1.10	3.50	AR	AR B W	AR	AR W
1.20	3.82		B W
1.25	3.97	W	B W		W
1.35	4.29	W	A B W			A
1.50	4.77	A W	A B W		W
1.65	5.25	W	B W
1.75	5.56		B W
2.00	6.36	W	B W		W
2.25	7.15	W	B W
2.50	7.95	W	B W
2.75	8.74	W	B W
3.00	9.54	W	B W			B
3.25	10.33		B W			B
3.50	11.13	A	B W			B
3.75	11.92		B W			B
4.00	12.72		B W		B	B
4.50	14.31	B	B W		W	B
5.00	15.90	W	B W			B
5.50	17.49	B	B W
6.00	19.08	B	B W
6.50	20.67	B W	B W
7.00	22.26		B W
7.50	23.85	B W	B W
8.00	25.44	B W	B W
8.50	27.02	B	B		B
9.00	28.61	B	B		B
9.50	30.20	B	B		B
10.00	31.79	B	B		B
11.00	34.97		B		B
12.00	38.15		B		B
13.00	41.33		B W
14.00	44.51	B	A B
15.00	47.69		A B
17.00	54.05		B
18.00	57.23	A	B
19.00	60.41		B
20.00	63.59	B	B		B
22.00	69.95	B	B		B BPS
24.00	76.31	B	A B		B BPS
26.00	82.66	B	B		B
28.00	89.02	B	B		B
30.00	95.38	B	B		B
32.00	101.74	B	B		B
35.00	111.28	B	B		B
40.00	127.18	B	B		B
45.00	143.07	B	B		B
50.00	158.97	B	B		B

Choosing and fitting

Parts of this type are selected by three parameters: flow rate (expressed in US gallons per hour or kg/h at a reference pressure), spray angle (commonly 30 to 80 degrees), and spray pattern (hollow cone, solid cone, or semi-solid cone). The thread size must match the burner's nozzle adapter. When replacing a nozzle, clean the nozzle adapter and replace the strainer if the burner has one. Nozzles are not repairable and should be replaced as part of annual maintenance or whenever flame quality deteriorates.

Signs of failure

Items of this kind can fail due to clogging, wear, or incorrect selection, leading to sooting, pressure pulsation, or unstable ignition. Symptoms include poor flame quality, incomplete combustion, or difficulty starting. Check the nozzle for blockages or damage and verify that the spray pattern and angle match the burner's requirements.

All specifications