Name: Delavan Oil nozzle 2.00GPH,60W 00200-60W1
Brand: Delavan
SKU: 00200-60W1

Flow rate

2 GPH

Spray angle

60 °

Spray pattern

Choose a nozzle by its marks

Nozzles of different brands interchange when the marks match: Flow rate, Spray angle, Spray pattern. Set them as on the old nozzle — below are the ones that fit, with price and stock.

Description

The Delavan 00200-60W1 is an oil nozzle with a flow rate of 2 GPH, a 60° spray angle, and a W spray pattern. It is used in oil-fired burners and boilers to atomise fuel oil into a spray for combustion. The 60° angle defines the cone width of the spray, while the W pattern describes the distribution of fuel within that cone. The nozzle is identified by the SKU 00200-60W1 and belongs to the Delavan oil nozzle category.

Nozzle selection chart

Flow rate	kg/h	45°	60°	70°	80°	90°
0.30	0.95		B
0.40	1.27	B	B W		B
0.50	1.59	W	A B E W		A W
0.55	1.75		B W		W
0.60	1.91	W	B E W	W	W
0.65	2.07	W	B E W		W
0.70	2.23		B W
0.75	2.38	A B W	B W		A W
0.80	2.54		W
0.85	2.70	W	B W	A	A W
0.90	2.86		B W		A
1.00	3.18	W	B W
1.10	3.50	AR	AR B W	AR	AR W
1.20	3.82		B W
1.25	3.97	W	B W		W
1.35	4.29	W	A B W			A
1.50	4.77	A W	A B W		W
1.65	5.25	W	B W
1.75	5.56		B W
2.00	6.36	W	B W		W
2.25	7.15	W	B W
2.50	7.95	W	B W
2.75	8.74	W	B W
3.00	9.54	W	B W			B
3.25	10.33		B W			B
3.50	11.13	A	B W			B
3.75	11.92		B W			B
4.00	12.72		B W		B	B
4.50	14.31	B	B W		W	B
5.00	15.90	W	B W			B
5.50	17.49	B	B W
6.00	19.08	B	B W
6.50	20.67	B W	B W
7.00	22.26		B W
7.50	23.85	B W	B W
8.00	25.44	B W	B W
8.50	27.02	B	B		B
9.00	28.61	B	B		B
9.50	30.20	B	B		B
10.00	31.79	B	B		B
11.00	34.97		B		B
12.00	38.15		B		B
13.00	41.33		B W
14.00	44.51	B	A B
15.00	47.69		A B
17.00	54.05		B
18.00	57.23	A	B
19.00	60.41		B
20.00	63.59	B	B		B
22.00	69.95	B	B		B BPS
24.00	76.31	B	A B		B BPS
26.00	82.66	B	B		B
28.00	89.02	B	B		B
30.00	95.38	B	B		B
32.00	101.74	B	B		B
35.00	111.28	B	B		B
40.00	127.18	B	B		B
45.00	143.07	B	B		B
50.00	158.97	B	B		B

Choosing and fitting

Oil nozzles of this type are selected by matching the flow rate, spray angle, and spray pattern to the burner manufacturer's specification. The mounting form and thread must also match the nozzle adapter or burner head, and the correct nozzle size is confirmed by comparing the required GPH rating and spray angle before ordering. The spray pattern letter must correspond to the combustion chamber shape and air flow characteristics of the equipment.

Signs of failure

Oil nozzles of this kind commonly fail through clogging of the internal passages or orifice, wear of the metering components, or leakage at the seat. When this happens, the burner may produce a poor flame shape, delayed ignition, pulsating combustion, or increased smoke and soot. The nozzle should be checked for blockage, wear, and correct spray pattern, and the fuel pressure and filtration should be verified before replacement.