Steinen Oil nozzle 0.45GPH / 60ST
SKU 0.45GPH / 60ST
Brand Steinen
Photos
no photo yet
—price on request
on order
shipping calculated at checkout
- Worldwide shipping from stock
- Original manufacturer part
- Dispatch within 24 h for stocked items
Description
The Steinen Oil nozzle 0.45GPH / 60ST is an oil nozzle with a flow rate of 0.45 GPH, a 60° spray angle, and an ST spray pattern. It is used to atomize fuel oil in burners and boilers, forming a spray that mixes with combustion air. The 60° angle defines the cone width of the spray, and the ST pattern defines the shape of the spray distribution. Its SKU is 0.45GPH / 60ST.
Nozzle selection chart
| Flow rate | kg/h | 45° | 60° | 80° |
|---|---|---|---|---|
| 0.40 | 1.27 | ST | ||
| 0.45 | 1.43 | ST | ||
| 0.50 | 1.59 | ST | ||
| 0.55 | 1.75 | ST | ||
| 0.60 | 1.91 | SST | ||
| 0.65 | 2.07 | S | ||
| 0.75 | 2.38 | S | ||
| 0.85 | 2.70 | S | ||
| 1.00 | 3.18 | HS | S | |
| 1.10 | 3.50 | S | ||
| 1.20 | 3.82 | S | ||
| 1.25 | 3.97 | S | ||
| 1.35 | 4.29 | S | ||
| 1.50 | 4.77 | S | ||
| 1.65 | 5.25 | S | ||
| 1.75 | 5.56 | S | S | |
| 2.00 | 6.36 | S | S | |
| 2.25 | 7.15 | S | S | |
| 2.50 | 7.95 | S | ||
| 2.75 | 8.74 | S | ||
| 3.00 | 9.54 | S | ||
| 3.50 | 11.13 | S | ||
| 4.00 | 12.72 | S | ||
| 4.50 | 14.31 | SS | SS | |
| 5.00 | 15.90 | SS | SS | |
| 5.50 | 17.49 | SS | SS | |
| 6.00 | 19.08 | SS | SS | SS |
| 6.50 | 20.67 | SS | SS | |
| 7.00 | 22.26 | SS | SS | |
| 7.50 | 23.85 | SS | SS | |
| 8.00 | 25.44 | SS | SS | |
| 8.50 | 27.02 | SS | ||
| 9.00 | 28.61 | SS | SS | SS |
| 10.00 | 31.79 | SS | SS | SS |
| 11.00 | 34.97 | SS | SS | |
| 12.00 | 38.15 | SS | SS | |
| 13.00 | 41.33 | SS | SS | |
| 14.00 | 44.51 | SS | SS | |
| 15.00 | 47.69 | SS | SS | |
| 16.00 | 50.87 | SS | SS | |
| 17.00 | 54.05 | SS | SS | |
| 18.00 | 57.23 | SS | SS | |
| 20.00 | 63.59 | SS | SS | |
| 22.00 | 69.95 | SS | SS | |
| 24.00 | 76.31 | SS | SS | |
| 26.00 | 82.66 | SS | SS | |
| 28.00 | 89.02 | SS | ||
| 30.00 | 95.38 | SS |
Choosing and fitting
Oil nozzles of this type are selected by matching the flow rate, spray angle, and spray pattern to the burner or boiler requirements. The mounting form and thread must match the nozzle adapter or holder on the equipment. Before ordering, compare the existing nozzle's markings and measure the thread and seating dimensions.
Signs of failure
Oil nozzles of this kind can clog, wear at the orifice, or develop a distorted spray pattern. When this happens, the equipment may show poor combustion, sooting, or an unstable flame. Check the nozzle for blockage or wear and compare the spray pattern against the specified angle and pattern.
All specifications
| Flow rate | 0.45 GPH |
|---|---|
| Spray angle | 60 ° |
| Spray pattern | ST |
Part numbers
| SKU | 0.45GPH / 60ST |
|---|