Steinen Oil nozzle 7.50GPH / 60SS
SKU 7.50GPH / 60SS
Brand Steinen
Photos
no photo yet
—price on request
on order
shipping calculated at checkout
- Worldwide shipping from stock
- Original manufacturer part
- Dispatch within 24 h for stocked items
Description
This is a Steinen oil nozzle with a flow rate of 7.5 GPH, a 60 ° spray angle, and an SS spray pattern. It is used in oil burners to atomise fuel into a spray for combustion. The 60 ° angle defines the cone width of the spray, while the SS pattern designates the spray shape. The 7.5 GPH rating states the volume of oil the nozzle passes per hour at its rated pressure.
Nozzle selection chart
| Flow rate | kg/h | 45° | 60° | 80° |
|---|---|---|---|---|
| 0.40 | 1.27 | ST | ||
| 0.45 | 1.43 | ST | ||
| 0.50 | 1.59 | ST | ||
| 0.55 | 1.75 | ST | ||
| 0.60 | 1.91 | SST | ||
| 0.65 | 2.07 | S | ||
| 0.75 | 2.38 | S | ||
| 0.85 | 2.70 | S | ||
| 1.00 | 3.18 | HS | S | |
| 1.10 | 3.50 | S | ||
| 1.20 | 3.82 | S | ||
| 1.25 | 3.97 | S | ||
| 1.35 | 4.29 | S | ||
| 1.50 | 4.77 | S | ||
| 1.65 | 5.25 | S | ||
| 1.75 | 5.56 | S | S | |
| 2.00 | 6.36 | S | S | |
| 2.25 | 7.15 | S | S | |
| 2.50 | 7.95 | S | ||
| 2.75 | 8.74 | S | ||
| 3.00 | 9.54 | S | ||
| 3.50 | 11.13 | S | ||
| 4.00 | 12.72 | S | ||
| 4.50 | 14.31 | SS | SS | |
| 5.00 | 15.90 | SS | SS | |
| 5.50 | 17.49 | SS | SS | |
| 6.00 | 19.08 | SS | SS | SS |
| 6.50 | 20.67 | SS | SS | |
| 7.00 | 22.26 | SS | SS | |
| 7.50 | 23.85 | SS | SS | |
| 8.00 | 25.44 | SS | SS | |
| 8.50 | 27.02 | SS | ||
| 9.00 | 28.61 | SS | SS | SS |
| 10.00 | 31.79 | SS | SS | SS |
| 11.00 | 34.97 | SS | SS | |
| 12.00 | 38.15 | SS | SS | |
| 13.00 | 41.33 | SS | SS | |
| 14.00 | 44.51 | SS | SS | |
| 15.00 | 47.69 | SS | SS | |
| 16.00 | 50.87 | SS | SS | |
| 17.00 | 54.05 | SS | SS | |
| 18.00 | 57.23 | SS | SS | |
| 20.00 | 63.59 | SS | SS | |
| 22.00 | 69.95 | SS | SS | |
| 24.00 | 76.31 | SS | SS | |
| 26.00 | 82.66 | SS | SS | |
| 28.00 | 89.02 | SS | ||
| 30.00 | 95.38 | SS |
Choosing and fitting
Nozzles of this type are selected by matching the flow rate, spray angle, and spray pattern to the burner's requirements, and by confirming the thread and mounting form fit the nozzle adapter. Before ordering, compare the existing nozzle's markings and measure the thread and seat. The nozzle seat and adapter must be clean and undamaged so the nozzle seals correctly.
Signs of failure
Nozzles of this kind commonly clog, wear at the orifice, or develop a distorted spray pattern. The equipment may then show poor combustion, smoke, soot, or an unstable flame. Check the nozzle for blockage or wear and compare the spray pattern against the specified angle and pattern.
All specifications
| Flow rate | 7.5 GPH |
|---|---|
| Spray angle | 60 ° |
| Spray pattern | SS |
Part numbers
| SKU | 7.50GPH / 60SS |
|---|