Steinen Oil nozzle 1.35GPH / 60S
SKU 1.35GPH / 60S
Brand Steinen
Photos
no photo yet
—price on request
on order
shipping calculated at checkout
- Worldwide shipping from stock
- Original manufacturer part
- Dispatch within 24 h for stocked items
Description
The Steinen 1.35GPH / 60S is an oil nozzle for pressure-jet oil burners. It meters fuel at a flow rate of 1.35 GPH. The spray angle is 60 °. The spray pattern is S. It is listed under the category Oil nozzle with the SKU 1.35GPH / 60S.
Nozzle selection chart
| Flow rate | kg/h | 45° | 60° | 80° |
|---|---|---|---|---|
| 0.40 | 1.27 | ST | ||
| 0.45 | 1.43 | ST | ||
| 0.50 | 1.59 | ST | ||
| 0.55 | 1.75 | ST | ||
| 0.60 | 1.91 | SST | ||
| 0.65 | 2.07 | S | ||
| 0.75 | 2.38 | S | ||
| 0.85 | 2.70 | S | ||
| 1.00 | 3.18 | HS | S | |
| 1.10 | 3.50 | S | ||
| 1.20 | 3.82 | S | ||
| 1.25 | 3.97 | S | ||
| 1.35 | 4.29 | S | ||
| 1.50 | 4.77 | S | ||
| 1.65 | 5.25 | S | ||
| 1.75 | 5.56 | S | S | |
| 2.00 | 6.36 | S | S | |
| 2.25 | 7.15 | S | S | |
| 2.50 | 7.95 | S | ||
| 2.75 | 8.74 | S | ||
| 3.00 | 9.54 | S | ||
| 3.50 | 11.13 | S | ||
| 4.00 | 12.72 | S | ||
| 4.50 | 14.31 | SS | SS | |
| 5.00 | 15.90 | SS | SS | |
| 5.50 | 17.49 | SS | SS | |
| 6.00 | 19.08 | SS | SS | SS |
| 6.50 | 20.67 | SS | SS | |
| 7.00 | 22.26 | SS | SS | |
| 7.50 | 23.85 | SS | SS | |
| 8.00 | 25.44 | SS | SS | |
| 8.50 | 27.02 | SS | ||
| 9.00 | 28.61 | SS | SS | SS |
| 10.00 | 31.79 | SS | SS | SS |
| 11.00 | 34.97 | SS | SS | |
| 12.00 | 38.15 | SS | SS | |
| 13.00 | 41.33 | SS | SS | |
| 14.00 | 44.51 | SS | SS | |
| 15.00 | 47.69 | SS | SS | |
| 16.00 | 50.87 | SS | SS | |
| 17.00 | 54.05 | SS | SS | |
| 18.00 | 57.23 | SS | SS | |
| 20.00 | 63.59 | SS | SS | |
| 22.00 | 69.95 | SS | SS | |
| 24.00 | 76.31 | SS | SS | |
| 26.00 | 82.66 | SS | SS | |
| 28.00 | 89.02 | SS | ||
| 30.00 | 95.38 | SS |
Choosing and fitting
Nozzles of this type are selected by matching the flow rate, spray angle and spray pattern to the burner manufacturer's specification. The mounting thread and the nozzle body length must match the nozzle holder on the burner. Before ordering, compare the markings on the old nozzle with the required values and check the seat and the holder for damage.
Signs of failure
Nozzles of this type can clog, wear at the orifice, or develop a distorted spray pattern. The equipment may then show poor combustion, smoke, soot deposits, a pulsating flame or failure to ignite. Check the nozzle for blockage and wear, and compare the spray pattern with the specified angle and pattern.
All specifications
| Flow rate | 1.35 GPH |
|---|---|
| Spray angle | 60 ° |
| Spray pattern | S |
Part numbers
| SKU | 1.35GPH / 60S |
|---|---|
| Additional article | 908.892.030 |