Steinen Oil nozzle 2.25GPH / 45S
SKU 2.25GPH / 45S
Brand Steinen
Photos
no photo yet
—price on request
on order
shipping calculated at checkout
- Worldwide shipping from stock
- Original manufacturer part
- Dispatch within 24 h for stocked items
Description
The Steinen 2.25GPH / 45S is an oil nozzle for oil-fired burners. It meters fuel at a flow rate of 2.25 GPH. The spray angle is 45 °. The spray pattern is S. It is listed under the category Oil nozzle with the SKU 2.25GPH / 45S.
Nozzle selection chart
| Flow rate | kg/h | 45° | 60° | 80° |
|---|---|---|---|---|
| 0.40 | 1.27 | ST | ||
| 0.45 | 1.43 | ST | ||
| 0.50 | 1.59 | ST | ||
| 0.55 | 1.75 | ST | ||
| 0.60 | 1.91 | SST | ||
| 0.65 | 2.07 | S | ||
| 0.75 | 2.38 | S | ||
| 0.85 | 2.70 | S | ||
| 1.00 | 3.18 | HS | S | |
| 1.10 | 3.50 | S | ||
| 1.20 | 3.82 | S | ||
| 1.25 | 3.97 | S | ||
| 1.35 | 4.29 | S | ||
| 1.50 | 4.77 | S | ||
| 1.65 | 5.25 | S | ||
| 1.75 | 5.56 | S | S | |
| 2.00 | 6.36 | S | S | |
| 2.25 | 7.15 | S | S | |
| 2.50 | 7.95 | S | ||
| 2.75 | 8.74 | S | ||
| 3.00 | 9.54 | S | ||
| 3.50 | 11.13 | S | ||
| 4.00 | 12.72 | S | ||
| 4.50 | 14.31 | SS | SS | |
| 5.00 | 15.90 | SS | SS | |
| 5.50 | 17.49 | SS | SS | |
| 6.00 | 19.08 | SS | SS | SS |
| 6.50 | 20.67 | SS | SS | |
| 7.00 | 22.26 | SS | SS | |
| 7.50 | 23.85 | SS | SS | |
| 8.00 | 25.44 | SS | SS | |
| 8.50 | 27.02 | SS | ||
| 9.00 | 28.61 | SS | SS | SS |
| 10.00 | 31.79 | SS | SS | SS |
| 11.00 | 34.97 | SS | SS | |
| 12.00 | 38.15 | SS | SS | |
| 13.00 | 41.33 | SS | SS | |
| 14.00 | 44.51 | SS | SS | |
| 15.00 | 47.69 | SS | SS | |
| 16.00 | 50.87 | SS | SS | |
| 17.00 | 54.05 | SS | SS | |
| 18.00 | 57.23 | SS | SS | |
| 20.00 | 63.59 | SS | SS | |
| 22.00 | 69.95 | SS | SS | |
| 24.00 | 76.31 | SS | SS | |
| 26.00 | 82.66 | SS | SS | |
| 28.00 | 89.02 | SS | ||
| 30.00 | 95.38 | SS |
Choosing and fitting
Nozzles of this type are selected by matching the flow rate, spray angle, and spray pattern to the burner manufacturer's specification. The mounting form and thread must match the nozzle adapter or nozzle line in the burner. Before ordering, compare the existing nozzle's markings and measure the thread and seating surface.
Signs of failure
Nozzles of this type can clog, wear at the orifice, or develop a distorted spray pattern. The equipment may then show poor combustion, smoke, soot, or an unstable flame. Check the nozzle strainer, the spray pattern, and the electrode and nozzle alignment.
All specifications
| Flow rate | 2.25 GPH |
|---|---|
| Spray angle | 45 ° |
| Spray pattern | S |
Part numbers
| SKU | 2.25GPH / 45S |
|---|