Steinen Oil nozzle 0.60GPH / 60ST
SKU 0.60GPH / 60ST
Brand Steinen
Photos
no photo yet
—price on request
on order
shipping calculated at checkout
- Worldwide shipping from stock
- Original manufacturer part
- Dispatch within 24 h for stocked items
Description
The Steinen Oil nozzle 0.60GPH / 60ST is an oil nozzle for burners and boilers. It has a flow rate of 0.6 GPH. The spray angle is 60 °. The spray pattern is ST.
Nozzle selection chart
| Flow rate | kg/h | 45° | 60° | 80° |
|---|---|---|---|---|
| 0.40 | 1.27 | ST | ||
| 0.45 | 1.43 | ST | ||
| 0.50 | 1.59 | ST | ||
| 0.55 | 1.75 | ST | ||
| 0.60 | 1.91 | SST | ||
| 0.65 | 2.07 | S | ||
| 0.75 | 2.38 | S | ||
| 0.85 | 2.70 | S | ||
| 1.00 | 3.18 | HS | S | |
| 1.10 | 3.50 | S | ||
| 1.20 | 3.82 | S | ||
| 1.25 | 3.97 | S | ||
| 1.35 | 4.29 | S | ||
| 1.50 | 4.77 | S | ||
| 1.65 | 5.25 | S | ||
| 1.75 | 5.56 | S | S | |
| 2.00 | 6.36 | S | S | |
| 2.25 | 7.15 | S | S | |
| 2.50 | 7.95 | S | ||
| 2.75 | 8.74 | S | ||
| 3.00 | 9.54 | S | ||
| 3.50 | 11.13 | S | ||
| 4.00 | 12.72 | S | ||
| 4.50 | 14.31 | SS | SS | |
| 5.00 | 15.90 | SS | SS | |
| 5.50 | 17.49 | SS | SS | |
| 6.00 | 19.08 | SS | SS | SS |
| 6.50 | 20.67 | SS | SS | |
| 7.00 | 22.26 | SS | SS | |
| 7.50 | 23.85 | SS | SS | |
| 8.00 | 25.44 | SS | SS | |
| 8.50 | 27.02 | SS | ||
| 9.00 | 28.61 | SS | SS | SS |
| 10.00 | 31.79 | SS | SS | SS |
| 11.00 | 34.97 | SS | SS | |
| 12.00 | 38.15 | SS | SS | |
| 13.00 | 41.33 | SS | SS | |
| 14.00 | 44.51 | SS | SS | |
| 15.00 | 47.69 | SS | SS | |
| 16.00 | 50.87 | SS | SS | |
| 17.00 | 54.05 | SS | SS | |
| 18.00 | 57.23 | SS | SS | |
| 20.00 | 63.59 | SS | SS | |
| 22.00 | 69.95 | SS | SS | |
| 24.00 | 76.31 | SS | SS | |
| 26.00 | 82.66 | SS | SS | |
| 28.00 | 89.02 | SS | ||
| 30.00 | 95.38 | SS |
Choosing and fitting
Oil nozzles of this type are selected by matching the flow rate, spray angle, and spray pattern to the burner or boiler requirements. The mounting form must match the nozzle holder, and the thread and sealing face must be compared before ordering. The nozzle is installed in the nozzle holder and tightened to the specified torque.
Signs of failure
Oil nozzles of this kind can fail by clogging, wear, or damage to the spray orifice. When this happens, the equipment may show poor combustion, soot, or flame instability. Check the nozzle for blockage or wear, and compare the spray pattern and flow rate with the specification.
All specifications
| Flow rate | 0.6 GPH |
|---|---|
| Spray angle | 60 ° |
| Spray pattern | ST |
Part numbers
| SKU | 0.60GPH / 60ST |
|---|