Name: Monarch Oil nozzle 0.85GPH / 45R
Brand: Monarch
SKU: 0.85GPH / 45R

Flow rate

0.85 GPH

Spray angle

45 °

Spray pattern

Description

This is an oil nozzle with a flow rate of 0.85 GPH, a 45 ° spray angle, and an R spray pattern. It is used to atomise fuel oil into a fine spray for combustion in an oil burner. The 0.85 GPH rating defines the volume of oil delivered per hour at the nozzle's rated pressure. The 45 ° angle sets the width of the spray cone, and the R pattern determines the shape of the spray distribution.

Nozzle selection chart

Flow rate	kg/h	45°	60°	80°
0.40	1.27	R		R
0.45	1.43	R
0.50	1.59	R	R
0.55	1.75	R
0.60	1.91	R
0.65	2.07	R		R
0.75	2.38	R	R
0.85	2.70	R	R
1.00	3.18	R	R	R
1.10	3.50	R
1.20	3.82	R
1.25	3.97	R	R	R
1.35	4.29	R	R
1.50	4.77	R	R	R
1.65	5.25	R	R
1.75	5.56	R
2.00	6.36	R	HO R	PLP R
2.25	7.15	PLP R	PLP R	R
2.50	7.95	PLP R	HO PLP R
3.00	9.54	PLP R	HO PLP R
3.50	11.13	HO PLP R	HO R
4.00	12.72	PLP	BPS PLP
4.50	14.31	PLP	BPS HO PLP	PLP
5.00	15.90	HO PLP	BPS PLP
5.50	17.49	PLP	BPS HO
6.00	19.08	PLP	BPS PLP
6.50	20.67	PLP	BPS PLP
7.00	22.26	PLP	BPS HO PLP
7.50	23.85	PLP	BPS HO
8.00	25.44	PLP	BPS PLP
8.50	27.02	HO PLP	PLP
9.00	28.61	HO PLP	BPS HO	PLP
9.50	30.20	HO PLP	BPS PLP
10.00	31.79		PLP
10.50	33.38	HO PLP	PLP	PLP
12.00	38.15	HO PLP	HO PLP
13.00	41.33	PLP	PLP
13.50	42.92	HO PLP
14.00	44.51	PLP	PLP
15.00	47.69	PLP	HO PLP
15.50	49.28	PLP	PLP
16.00	50.87	PLP
17.00	54.05	PLP	PLP
17.50	55.64	HO
18.00	57.23		PLP
19.50	62.00	HO PLP	PLP
20.00	63.59		PLP
21.50	68.36	PLP	PLP
24.00	76.31	PLP
28.00	89.02	HO PLP
30.00	95.38	HO		PLP
40.00	127.18		PLP	PLP
45.00	143.07			PLP
50.00	158.97			PLP
55.00	174.87		PLP
60.00	190.76			PLP
70.00	222.56			PLP
80.00	254.35			PLP
90.00	286.15			PLP
100.00	317.94			PLP

Choosing and fitting

Nozzles of this type are selected by matching the flow rate, spray angle, and spray pattern to the burner's requirements. The mounting form and thread must match the nozzle adapter or nozzle line in the burner. Before ordering, compare the existing nozzle's markings and dimensions with the replacement. The pump pressure and the burner's combustion settings must also be compatible with the nozzle's rated flow.

Signs of failure

Nozzles of this kind can clog, wear at the orifice, or develop a distorted spray pattern over time. When this happens, the burner may produce a smoky flame, fail to ignite, or run erratically. A clogged or worn nozzle can also cause delayed ignition or pulsating combustion. Check the nozzle for blockage, wear, and spray shape, and compare the flame condition before and after replacement.