Name: Monarch Oil nozzle 1.00GPH / 60R
Brand: Monarch
SKU: 1.00GPH / 60R

Flow rate

1 GPH

Spray angle

60 °

Spray pattern

Description

The Monarch Oil nozzle 1.00GPH / 60R is an oil burner nozzle with a rated flow rate of 1 GPH. It produces a 60 ° spray angle in an R spray pattern. The item is classified as an oil nozzle and carries the SKU 1.00GPH / 60R. It is intended to atomise fuel oil for combustion in oil-fired burners and boilers.

Nozzle selection chart

Flow rate	kg/h	45°	60°	80°
0.40	1.27	R		R
0.45	1.43	R
0.50	1.59	R	R
0.55	1.75	R
0.60	1.91	R
0.65	2.07	R		R
0.75	2.38	R	R
0.85	2.70	R	R
1.00	3.18	R	R	R
1.10	3.50	R
1.20	3.82	R
1.25	3.97	R	R	R
1.35	4.29	R	R
1.50	4.77	R	R	R
1.65	5.25	R	R
1.75	5.56	R
2.00	6.36	R	HO R	PLP R
2.25	7.15	PLP R	PLP R	R
2.50	7.95	PLP R	HO PLP R
3.00	9.54	PLP R	HO PLP R
3.50	11.13	HO PLP R	HO R
4.00	12.72	PLP	BPS PLP
4.50	14.31	PLP	BPS HO PLP	PLP
5.00	15.90	HO PLP	BPS PLP
5.50	17.49	PLP	BPS HO
6.00	19.08	PLP	BPS PLP
6.50	20.67	PLP	BPS PLP
7.00	22.26	PLP	BPS HO PLP
7.50	23.85	PLP	BPS HO
8.00	25.44	PLP	BPS PLP
8.50	27.02	HO PLP	PLP
9.00	28.61	HO PLP	BPS HO	PLP
9.50	30.20	HO PLP	BPS PLP
10.00	31.79		PLP
10.50	33.38	HO PLP	PLP	PLP
12.00	38.15	HO PLP	HO PLP
13.00	41.33	PLP	PLP
13.50	42.92	HO PLP
14.00	44.51	PLP	PLP
15.00	47.69	PLP	HO PLP
15.50	49.28	PLP	PLP
16.00	50.87	PLP
17.00	54.05	PLP	PLP
17.50	55.64	HO
18.00	57.23		PLP
19.50	62.00	HO PLP	PLP
20.00	63.59		PLP
21.50	68.36	PLP	PLP
24.00	76.31	PLP
28.00	89.02	HO PLP
30.00	95.38	HO		PLP
40.00	127.18		PLP	PLP
45.00	143.07			PLP
50.00	158.97			PLP
55.00	174.87		PLP
60.00	190.76			PLP
70.00	222.56			PLP
80.00	254.35			PLP
90.00	286.15			PLP
100.00	317.94			PLP

Choosing and fitting

Nozzles of this type are selected by matching the required flow rate, spray angle and spray pattern to the burner's specification. The mounting form and thread must match the nozzle adapter or holder on the burner before ordering. The rated flow rate, spray angle and spray pattern of the replacement must correspond to the values required by the appliance.

Signs of failure

Nozzles of this kind commonly fail through clogging, wear of the orifice, or a distorted spray pattern. When this happens the burner may show poor combustion, smoke, soot deposits, flame instability or failure to ignite. The nozzle should be checked for blockage and spray quality, and the fuel supply and filter examined before replacement.