Name: Monarch Oil nozzle 60.00GPH / 80PLP
Brand: Monarch
SKU: 60.00GPH / 80PLP
Price: 54.45 EUR
Availability: InStock

Flow rate

60 GPH

Spray angle

80 °

Spray pattern

PLP

Choose a nozzle by its marks

Nozzles of different brands interchange when the marks match: Flow rate, Spray angle, Spray pattern. Set them as on the old nozzle — below are the ones that fit, with price and stock.

Description

The Monarch Oil nozzle 60.00GPH / 80PLP is a precision consumable part that atomizes fuel oil into a fine cone for complete and stable combustion. It has a capacity of 60 gallons per hour, a spray angle of 80 degrees, and a spray pattern designated as PLP. This nozzle is designed for use in oil burners to evenly distribute fuel and form an optimal mixture with air, ensuring efficient combustion. The designation 60.00GPH / 80PLP indicates its flow rate at the reference pressure, spray angle, and pattern code, which must match the burner data plate for proper operation.

Nozzle selection chart

Flow rate	kg/h	45°	60°	80°
0.40	1.27	R		R
0.45	1.43	R
0.50	1.59	R	R
0.55	1.75	R
0.60	1.91	R
0.65	2.07	R		R
0.75	2.38	R	R
0.85	2.70	R	R
1.00	3.18	R	R	R
1.10	3.50	R
1.20	3.82	R
1.25	3.97	R	R	R
1.35	4.29	R	R
1.50	4.77	R	R	R
1.65	5.25	R	R
1.75	5.56	R
2.00	6.36	R	HO R	PLP R
2.25	7.15	PLP R	PLP R	R
2.50	7.95	PLP R	HO PLP R
3.00	9.54	PLP R	HO PLP R
3.50	11.13	HO PLP R	HO R
4.00	12.72	PLP	BPS PLP
4.50	14.31	PLP	BPS HO PLP	PLP
5.00	15.90	HO PLP	BPS PLP
5.50	17.49	PLP	BPS HO
6.00	19.08	PLP	BPS PLP
6.50	20.67	PLP	BPS PLP
7.00	22.26	PLP	BPS HO PLP
7.50	23.85	PLP	BPS HO
8.00	25.44	PLP	BPS PLP
8.50	27.02	HO PLP	PLP
9.00	28.61	HO PLP	BPS HO	PLP
9.50	30.20	HO PLP	BPS PLP
10.00	31.79		PLP
10.50	33.38	HO PLP	PLP	PLP
12.00	38.15	HO PLP	HO PLP
13.00	41.33	PLP	PLP
13.50	42.92	HO PLP
14.00	44.51	PLP	PLP
15.00	47.69	PLP	HO PLP
15.50	49.28	PLP	PLP
16.00	50.87	PLP
17.00	54.05	PLP	PLP
17.50	55.64	HO
18.00	57.23		PLP
19.50	62.00	HO PLP	PLP
20.00	63.59		PLP
21.50	68.36	PLP	PLP
24.00	76.31	PLP
28.00	89.02	HO PLP
30.00	95.38	HO		PLP
40.00	127.18		PLP	PLP
45.00	143.07			PLP
50.00	158.97			PLP
55.00	174.87		PLP
60.00	190.76			PLP
70.00	222.56			PLP
80.00	254.35			PLP
90.00	286.15			PLP
100.00	317.94			PLP

Choosing and fitting

When replacing a nozzle of this type, verify the existing part's marking and select a unit with the same GPH rating, spray angle, and pattern designation as specified on the burner data plate. The nozzle threads into the oil line and works with the oil pump and solenoid valve. Correct atomization depends on the pump pressure being set to the reference value used for the nozzle rating. Ensure all three parameters—flow rate, angle, and pattern—match to avoid sooting, pulsation, or ignition instability.

Signs of failure

If a nozzle of this kind fails or is mismatched, the burner may exhibit sooting, pulsation, or ignition instability. These symptoms can result from incorrect flow rate, spray angle, or pattern, or from improper pump pressure. Check the nozzle's marking against the burner data plate and verify the pump pressure is set to the reference value.