Monarch Oil nozzle 45.00GPH / 80PLP
SKU 45.00GPH / 80PLP
Brand Monarch
Photos
no photo yet
—price on request
on order
shipping calculated at checkout
- Worldwide shipping from stock
- Original manufacturer part
- Dispatch within 24 h for stocked items
Description
The Monarch Oil nozzle 45.00GPH / 80PLP is an oil burner nozzle with a flow rate of 45 GPH, a spray angle of 80°, and a PLP spray pattern. It meters and atomizes fuel oil into a spray for combustion in an oil-fired burner or boiler. The 80° spray angle and PLP pattern define the shape and distribution of the fuel spray leaving the nozzle. Its SKU is 45.00GPH / 80PLP.
Nozzle selection chart
| Flow rate | kg/h | 45° | 60° | 80° |
|---|---|---|---|---|
| 0.40 | 1.27 | R | R | |
| 0.45 | 1.43 | R | ||
| 0.50 | 1.59 | R | R | |
| 0.55 | 1.75 | R | ||
| 0.60 | 1.91 | R | ||
| 0.65 | 2.07 | R | R | |
| 0.75 | 2.38 | R | R | |
| 0.85 | 2.70 | R | R | |
| 1.00 | 3.18 | R | R | R |
| 1.10 | 3.50 | R | ||
| 1.20 | 3.82 | R | ||
| 1.25 | 3.97 | R | R | R |
| 1.35 | 4.29 | R | R | |
| 1.50 | 4.77 | R | R | R |
| 1.65 | 5.25 | R | R | |
| 1.75 | 5.56 | R | ||
| 2.00 | 6.36 | R | HOR | PLPR |
| 2.25 | 7.15 | PLPR | PLPR | R |
| 2.50 | 7.95 | PLPR | HOPLPR | |
| 3.00 | 9.54 | PLPR | HOPLPR | |
| 3.50 | 11.13 | HOPLPR | HOR | |
| 4.00 | 12.72 | PLP | BPSPLP | |
| 4.50 | 14.31 | PLP | BPSHOPLP | PLP |
| 5.00 | 15.90 | HOPLP | BPSPLP | |
| 5.50 | 17.49 | PLP | BPSHO | |
| 6.00 | 19.08 | PLP | BPSPLP | |
| 6.50 | 20.67 | PLP | BPSPLP | |
| 7.00 | 22.26 | PLP | BPSHOPLP | |
| 7.50 | 23.85 | PLP | BPSHO | |
| 8.00 | 25.44 | PLP | BPSPLP | |
| 8.50 | 27.02 | HOPLP | PLP | |
| 9.00 | 28.61 | HOPLP | BPSHO | PLP |
| 9.50 | 30.20 | HOPLP | BPSPLP | |
| 10.00 | 31.79 | PLP | ||
| 10.50 | 33.38 | HOPLP | PLP | PLP |
| 12.00 | 38.15 | HOPLP | HOPLP | |
| 13.00 | 41.33 | PLP | PLP | |
| 13.50 | 42.92 | HOPLP | ||
| 14.00 | 44.51 | PLP | PLP | |
| 15.00 | 47.69 | PLP | HOPLP | |
| 15.50 | 49.28 | PLP | PLP | |
| 16.00 | 50.87 | PLP | ||
| 17.00 | 54.05 | PLP | PLP | |
| 17.50 | 55.64 | HO | ||
| 18.00 | 57.23 | PLP | ||
| 19.50 | 62.00 | HOPLP | PLP | |
| 20.00 | 63.59 | PLP | ||
| 21.50 | 68.36 | PLP | PLP | |
| 24.00 | 76.31 | PLP | ||
| 28.00 | 89.02 | HOPLP | ||
| 30.00 | 95.38 | HO | PLP | |
| 40.00 | 127.18 | PLP | PLP | |
| 45.00 | 143.07 | PLP | ||
| 50.00 | 158.97 | PLP | ||
| 55.00 | 174.87 | PLP | ||
| 60.00 | 190.76 | PLP | ||
| 70.00 | 222.56 | PLP | ||
| 80.00 | 254.35 | PLP | ||
| 90.00 | 286.15 | PLP | ||
| 100.00 | 317.94 | PLP |
Choosing and fitting
Nozzles of this type are selected by matching the flow rate, spray angle, and spray pattern to the burner manufacturer's specification for the appliance. The mounting form and thread must match the nozzle adapter or burner gun, and the nozzle seat must be clean and undamaged before installation. Before ordering, compare the existing nozzle's markings and dimensions with the replacement, and verify the electrode and adapter arrangement where applicable.
Signs of failure
Nozzles of this kind commonly fail by clogging, wear of the orifice, or a distorted spray pattern, which can cause poor combustion, smoke, soot, or an unstable flame. The equipment may show delayed ignition, rumbling, or a flame that fails to establish. Check the nozzle for blockage, wear, and spray shape, and inspect the fuel supply and filter for contamination.
All specifications
| Flow rate | 45 GPH |
|---|---|
| Spray angle | 80 ° |
| Spray pattern | PLP |
Part numbers
| SKU | 45.00GPH / 80PLP |
|---|