Name: Monarch Oil nozzle 9.00GPH / 80PLP
Brand: Monarch
SKU: 9.00GPH / 80PLP

Flow rate

9 GPH

Spray angle

80 °

Spray pattern

PLP

Description

The Monarch Oil nozzle 9.00GPH / 80PLP is an oil burner nozzle with a flow rate of 9 GPH, a spray angle of 80 °, and a PLP spray pattern. It meters and atomizes fuel oil into a spray for combustion in an oil-fired burner. The 80 ° angle defines the cone width of the spray, and the PLP pattern defines the spray shape. It is identified by the SKU 9.00GPH / 80PLP.

Nozzle selection chart

Flow rate	kg/h	45°	60°	80°
0.40	1.27	R		R
0.45	1.43	R
0.50	1.59	R	R
0.55	1.75	R
0.60	1.91	R
0.65	2.07	R		R
0.75	2.38	R	R
0.85	2.70	R	R
1.00	3.18	R	R	R
1.10	3.50	R
1.20	3.82	R
1.25	3.97	R	R	R
1.35	4.29	R	R
1.50	4.77	R	R	R
1.65	5.25	R	R
1.75	5.56	R
2.00	6.36	R	HO R	PLP R
2.25	7.15	PLP R	PLP R	R
2.50	7.95	PLP R	HO PLP R
3.00	9.54	PLP R	HO PLP R
3.50	11.13	HO PLP R	HO R
4.00	12.72	PLP	BPS PLP
4.50	14.31	PLP	BPS HO PLP	PLP
5.00	15.90	HO PLP	BPS PLP
5.50	17.49	PLP	BPS HO
6.00	19.08	PLP	BPS PLP
6.50	20.67	PLP	BPS PLP
7.00	22.26	PLP	BPS HO PLP
7.50	23.85	PLP	BPS HO
8.00	25.44	PLP	BPS PLP
8.50	27.02	HO PLP	PLP
9.00	28.61	HO PLP	BPS HO	PLP
9.50	30.20	HO PLP	BPS PLP
10.00	31.79		PLP
10.50	33.38	HO PLP	PLP	PLP
12.00	38.15	HO PLP	HO PLP
13.00	41.33	PLP	PLP
13.50	42.92	HO PLP
14.00	44.51	PLP	PLP
15.00	47.69	PLP	HO PLP
15.50	49.28	PLP	PLP
16.00	50.87	PLP
17.00	54.05	PLP	PLP
17.50	55.64	HO
18.00	57.23		PLP
19.50	62.00	HO PLP	PLP
20.00	63.59		PLP
21.50	68.36	PLP	PLP
24.00	76.31	PLP
28.00	89.02	HO PLP
30.00	95.38	HO		PLP
40.00	127.18		PLP	PLP
45.00	143.07			PLP
50.00	158.97			PLP
55.00	174.87		PLP
60.00	190.76			PLP
70.00	222.56			PLP
80.00	254.35			PLP
90.00	286.15			PLP
100.00	317.94			PLP

Choosing and fitting

Nozzles of this type are selected by matching the flow rate, spray angle, and spray pattern to the burner's requirements, and by matching the mounting thread and body length to the nozzle adapter. Before ordering, compare the existing nozzle's stamped flow rate, angle, and pattern, and check the thread and overall dimensions against the adapter. Installation requires the nozzle to seat correctly on the adapter, with the electrode position and alignment set as specified for the burner.

Signs of failure

Nozzles of this kind can clog, wear at the orifice, or develop a distorted spray pattern over time. When this happens, the burner may show a weak or uneven flame, delayed ignition, pulsation, soot buildup, or a rise in flue gas opacity. Check the nozzle for blockage or wear, verify the spray pattern and angle, and confirm the flow rate against the burner specification before replacing it.