Name: Monarch Oil nozzle 2.25GPH / 80R
Brand: Monarch
SKU: 2.25GPH / 80R

Flow rate

2.25 GPH

Spray angle

80 °

Spray pattern

Description

The Monarch Oil nozzle 2.25GPH / 80R is an oil burner nozzle with a flow rate of 2.25 GPH, a spray angle of 80°, and an R spray pattern. It meters and atomises fuel oil for combustion in a burner. The 80° angle defines the cone width of the spray, and the R pattern denotes a solid cone. The 2.25 GPH figure states the volume of oil delivered per hour at the nozzle's rated pressure.

Nozzle selection chart

Flow rate	kg/h	45°	60°	80°
0.40	1.27	R		R
0.45	1.43	R
0.50	1.59	R	R
0.55	1.75	R
0.60	1.91	R
0.65	2.07	R		R
0.75	2.38	R	R
0.85	2.70	R	R
1.00	3.18	R	R	R
1.10	3.50	R
1.20	3.82	R
1.25	3.97	R	R	R
1.35	4.29	R	R
1.50	4.77	R	R	R
1.65	5.25	R	R
1.75	5.56	R
2.00	6.36	R	HO R	PLP R
2.25	7.15	PLP R	PLP R	R
2.50	7.95	PLP R	HO PLP R
3.00	9.54	PLP R	HO PLP R
3.50	11.13	HO PLP R	HO R
4.00	12.72	PLP	BPS PLP
4.50	14.31	PLP	BPS HO PLP	PLP
5.00	15.90	HO PLP	BPS PLP
5.50	17.49	PLP	BPS HO
6.00	19.08	PLP	BPS PLP
6.50	20.67	PLP	BPS PLP
7.00	22.26	PLP	BPS HO PLP
7.50	23.85	PLP	BPS HO
8.00	25.44	PLP	BPS PLP
8.50	27.02	HO PLP	PLP
9.00	28.61	HO PLP	BPS HO	PLP
9.50	30.20	HO PLP	BPS PLP
10.00	31.79		PLP
10.50	33.38	HO PLP	PLP	PLP
12.00	38.15	HO PLP	HO PLP
13.00	41.33	PLP	PLP
13.50	42.92	HO PLP
14.00	44.51	PLP	PLP
15.00	47.69	PLP	HO PLP
15.50	49.28	PLP	PLP
16.00	50.87	PLP
17.00	54.05	PLP	PLP
17.50	55.64	HO
18.00	57.23		PLP
19.50	62.00	HO PLP	PLP
20.00	63.59		PLP
21.50	68.36	PLP	PLP
24.00	76.31	PLP
28.00	89.02	HO PLP
30.00	95.38	HO		PLP
40.00	127.18		PLP	PLP
45.00	143.07			PLP
50.00	158.97			PLP
55.00	174.87		PLP
60.00	190.76			PLP
70.00	222.56			PLP
80.00	254.35			PLP
90.00	286.15			PLP
100.00	317.94			PLP

Choosing and fitting

Nozzles of this type are selected by matching the flow rate, spray angle, and spray pattern to the burner's requirements, and by matching the thread and body dimensions to the nozzle adapter. Mounting forms vary by burner make, so the seat, thread size, and overall length must be compared with the old nozzle before ordering. The rated pressure of the pump must also correspond to the pressure at which the flow rate is specified.

Signs of failure

Nozzles of this kind commonly fail by clogging, wear of the orifice, or a distorted spray pattern. When this happens the burner may show a weak or uneven flame, delayed ignition, sooting, or a rise in flue gas temperature. Checks include the spray pattern on a test sheet, the flow rate against the rated figure, and the condition of the strainer and nozzle seat.