Name: Monarch Oil nozzle 4.50GPH / 60BPS
Brand: Monarch
SKU: 4.50GPH / 60BPS

Flow rate

4.5 GPH

Spray angle

60 °

Spray pattern

BPS

Description

The Monarch Oil nozzle 4.50GPH / 60BPS is an oil burner nozzle with a flow rate of 4.5 GPH, a 60 ° spray angle, and a BPS spray pattern. It meters and atomises fuel oil for combustion in an oil-fired burner. The 60 ° angle defines the cone width of the spray leaving the orifice. The BPS pattern designates the distribution of fuel within that cone.

Nozzle selection chart

Flow rate	kg/h	45°	60°	80°
0.40	1.27	R		R
0.45	1.43	R
0.50	1.59	R	R
0.55	1.75	R
0.60	1.91	R
0.65	2.07	R		R
0.75	2.38	R	R
0.85	2.70	R	R
1.00	3.18	R	R	R
1.10	3.50	R
1.20	3.82	R
1.25	3.97	R	R	R
1.35	4.29	R	R
1.50	4.77	R	R	R
1.65	5.25	R	R
1.75	5.56	R
2.00	6.36	R	HO R	PLP R
2.25	7.15	PLP R	PLP R	R
2.50	7.95	PLP R	HO PLP R
3.00	9.54	PLP R	HO PLP R
3.50	11.13	HO PLP R	HO R
4.00	12.72	PLP	BPS PLP
4.50	14.31	PLP	BPS HO PLP	PLP
5.00	15.90	HO PLP	BPS PLP
5.50	17.49	PLP	BPS HO
6.00	19.08	PLP	BPS PLP
6.50	20.67	PLP	BPS PLP
7.00	22.26	PLP	BPS HO PLP
7.50	23.85	PLP	BPS HO
8.00	25.44	PLP	BPS PLP
8.50	27.02	HO PLP	PLP
9.00	28.61	HO PLP	BPS HO	PLP
9.50	30.20	HO PLP	BPS PLP
10.00	31.79		PLP
10.50	33.38	HO PLP	PLP	PLP
12.00	38.15	HO PLP	HO PLP
13.00	41.33	PLP	PLP
13.50	42.92	HO PLP
14.00	44.51	PLP	PLP
15.00	47.69	PLP	HO PLP
15.50	49.28	PLP	PLP
16.00	50.87	PLP
17.00	54.05	PLP	PLP
17.50	55.64	HO
18.00	57.23		PLP
19.50	62.00	HO PLP	PLP
20.00	63.59		PLP
21.50	68.36	PLP	PLP
24.00	76.31	PLP
28.00	89.02	HO PLP
30.00	95.38	HO		PLP
40.00	127.18		PLP	PLP
45.00	143.07			PLP
50.00	158.97			PLP
55.00	174.87		PLP
60.00	190.76			PLP
70.00	222.56			PLP
80.00	254.35			PLP
90.00	286.15			PLP
100.00	317.94			PLP

Choosing and fitting

Nozzles of this type are selected by matching the flow rate, spray angle, and spray pattern to the burner manufacturer's specification, and by matching the thread and body form to the nozzle adapter. Mounting forms differ between nozzle families, so the seat, thread, and overall length must be compared with the old part before ordering. The flow rate, angle, and pattern stamped on the nozzle must correspond to the values required by the appliance.

Signs of failure

Nozzles of this kind commonly fail by orifice wear or blockage, which alters the flow rate and the spray shape. The equipment may then show a smoky flame, poor ignition, pulsation, or a rise in fuel consumption. Checking the spray pattern, the strainer, and the nozzle seat is the usual first step when these signs appear.