Name: Danfoss Oil nozzle 31.50GPH,45B 030B0099
Brand: Danfoss
SKU: 030B0099

Flow rate

31.5 GPH

Spray angle

45 °

Spray pattern

Description

This is a Danfoss oil nozzle with a flow rate of 31.5 GPH, a 45 ° spray angle, and a B spray pattern. It is used in oil-fired burners and boilers to atomise the fuel supply into a spray suitable for combustion. The 45 ° angle determines the shape of the spray cone, while the B pattern defines the distribution of fuel within that cone. The nozzle is identified by SKU 030B0099.

Nozzle selection chart

Flow rate	kg/h	30°	45°	60°	80°
0.30	0.95			H S	H S
0.35	1.11			S	S
0.40	1.27		S	H S	H S
0.45	1.43		S	S	H S
0.50	1.59	S	S	H S	H S
0.55	1.75		S	H S	H S
0.60	1.91	S	H S	B H S	B H S
0.65	2.07		B S	B H S	B H S
0.75	2.38	S	B S	B H S	B H S SR
0.85	2.70	S	B H S	B H S SR	B H S
1.00	3.18	S	B S	B H S	B H S
1.10	3.50		S	H S	S
1.20	3.82		S	H S	S
1.25	3.97	S	B S	B H S	B H S
1.35	4.29		B S	B H S	B H S
1.50	4.77	S	B S	B H S	B H S
1.65	5.25		S	H S	H S
1.75	5.56	S	S	H S	S
2.00	6.36	S	B S	B H S	B H S
2.25	7.15	S	B S	B H S	S
2.50	7.95	S	B S	B H S	B S
2.75	8.74		B S	B H S	H S
3.00	9.54	S	B S	B H S	B H S
3.50	11.13		S	S	S
3.75	11.92		B	B	B
4.00	12.72		S	S	S
4.50	14.31		B S	B S	B S
5.00	15.90		B S	B S	B S
5.50	17.49		B S	B S	B S
6.00	19.08		B S	B S	B S
6.50	20.67		B	B	B
7.00	22.26			S
7.50	23.85		B	B	B
8.00	25.44			S
8.50	27.02		B	B	B
9.00	28.61			S
10.00	31.79		B	B	B
11.00	34.97		B	B	B
12.00	38.15		B	B	B
13.50	42.92		B	B	B
15.00	47.69		B	B	B
17.00	54.05			B	B
19.50	62.00			B	B
22.00	69.95		B	B	B
25.00	79.49			B	B
28.00	89.02			B	B
31.50	100.15		B	B	B
35.00	111.28		B

Choosing and fitting

Nozzles of this type are selected by matching the flow rate, spray angle, and spray pattern to the burner manufacturer's specification. The mounting thread and the length of the nozzle body must also match the nozzle holder on the burner. Before ordering, compare the markings on the existing nozzle with the required values, and check that the seat and the holder are clean and undamaged.

Signs of failure

Nozzles of this kind can become clogged or worn, which typically causes a distorted or uneven spray, poor combustion, and soot formation. The burner may fail to ignite, pulsate, or produce smoke and odours. Check the nozzle for blockage or wear, and verify the pump pressure and the condition of the oil filter when these symptoms appear.