Name: Danfoss Oil nozzle 1.00GPH,60B 030B0107
Brand: Danfoss
SKU: 030B0107

Flow rate

1 GPH

Spray angle

60 °

Spray pattern

Choose a nozzle by its marks

Nozzles of different brands interchange when the marks match: Flow rate, Spray angle, Spray pattern. Set them as on the old nozzle — below are the ones that fit, with price and stock.

Description

This is a Danfoss oil nozzle with a flow rate of 1 GPH, a 60° spray angle, and a B spray pattern. It is used in oil burners to atomise fuel into a fine spray for combustion. The 1 GPH rating defines the nominal flow delivered at the nozzle's rated pressure. The 60° angle sets the width of the conical spray, and the B pattern denotes a solid spray shape. The SKU for this item is 030B0107.

Nozzle selection chart

Flow rate	kg/h	30°	45°	60°	80°
0.30	0.95			H S	H S
0.35	1.11			S	S
0.40	1.27		S	H S	H S
0.45	1.43		S	S	H S
0.50	1.59	S	S	H S	H S
0.55	1.75		S	H S	H S
0.60	1.91	S	H S	B H S	B H S
0.65	2.07		B S	B H S	B H S
0.75	2.38	S	B S	B H S	B H S SR
0.85	2.70	S	B H S	B H S SR	B H S
1.00	3.18	S	B S	B H S	B H S
1.10	3.50		S	H S	S
1.20	3.82		S	H S	S
1.25	3.97	S	B S	B H S	B H S
1.35	4.29		B S	B H S	B H S
1.50	4.77	S	B S	B H S	B H S
1.65	5.25		S	H S	H S
1.75	5.56	S	S	H S	S
2.00	6.36	S	B S	B H S	B H S
2.25	7.15	S	B S	B H S	S
2.50	7.95	S	B S	B H S	B S
2.75	8.74		B S	B H S	H S
3.00	9.54	S	B S	B H S	B H S
3.50	11.13		S	S	S
3.75	11.92		B	B	B
4.00	12.72		S	S	S
4.50	14.31		B S	B S	B S
5.00	15.90		B S	B S	B S
5.50	17.49		B S	B S	B S
6.00	19.08		B S	B S	B S
6.50	20.67		B	B	B
7.00	22.26			S
7.50	23.85		B	B	B
8.00	25.44			S
8.50	27.02		B	B	B
9.00	28.61			S
10.00	31.79		B	B	B
11.00	34.97		B	B	B
12.00	38.15		B	B	B
13.50	42.92		B	B	B
15.00	47.69		B	B	B
17.00	54.05			B	B
19.50	62.00			B	B
22.00	69.95		B	B	B
25.00	79.49			B	B
28.00	89.02			B	B
31.50	100.15		B	B	B
35.00	111.28		B

Choosing and fitting

Nozzles of this type are selected by matching the flow rate, spray angle, and spray pattern to the burner manufacturer's specification. The mounting form must also match: most oil nozzles use a standard threaded body, but the thread size and seat configuration vary between burner models. Before ordering, compare the existing nozzle's markings and dimensions with the replacement, and check that the nozzle body seats correctly in the burner's nozzle adapter. The pump pressure stated for the appliance must correspond to the pressure at which the nozzle's rated flow is achieved.

Signs of failure

Oil nozzles of this kind commonly fail by clogging, wear of the orifice, or a damaged spray pattern. When this happens, the burner may produce a poor flame, smoke, soot, or fail to ignite, and combustion may become unstable. Check for a blocked or worn nozzle, verify the spray pattern and flow rate, and inspect the nozzle seat and filter for debris before replacing it.