Name: Danfoss Oil nozzle 0.65GPH,80B 030B0204
Brand: Danfoss
SKU: 030B0204

Flow rate

0.65 GPH

Spray angle

80 °

Spray pattern

Description

This is a Danfoss oil nozzle with a flow rate of 0.65 GPH, a spray angle of 80°, and a spray pattern of B. It is used in oil burners to atomise fuel oil into a fine spray for combustion. The 0.65 GPH rating defines the volume of oil delivered per hour at the rated pressure. The 80° spray angle determines the width of the conical spray pattern produced. The B pattern indicates a solid spray cone. The SKU for this item is 030B0204.

Nozzle selection chart

Flow rate	kg/h	30°	45°	60°	80°
0.30	0.95			H S	H S
0.35	1.11			S	S
0.40	1.27		S	H S	H S
0.45	1.43		S	S	H S
0.50	1.59	S	S	H S	H S
0.55	1.75		S	H S	H S
0.60	1.91	S	H S	B H S	B H S
0.65	2.07		B S	B H S	B H S
0.75	2.38	S	B S	B H S	B H S SR
0.85	2.70	S	B H S	B H S SR	B H S
1.00	3.18	S	B S	B H S	B H S
1.10	3.50		S	H S	S
1.20	3.82		S	H S	S
1.25	3.97	S	B S	B H S	B H S
1.35	4.29		B S	B H S	B H S
1.50	4.77	S	B S	B H S	B H S
1.65	5.25		S	H S	H S
1.75	5.56	S	S	H S	S
2.00	6.36	S	B S	B H S	B H S
2.25	7.15	S	B S	B H S	S
2.50	7.95	S	B S	B H S	B S
2.75	8.74		B S	B H S	H S
3.00	9.54	S	B S	B H S	B H S
3.50	11.13		S	S	S
3.75	11.92		B	B	B
4.00	12.72		S	S	S
4.50	14.31		B S	B S	B S
5.00	15.90		B S	B S	B S
5.50	17.49		B S	B S	B S
6.00	19.08		B S	B S	B S
6.50	20.67		B	B	B
7.00	22.26			S
7.50	23.85		B	B	B
8.00	25.44			S
8.50	27.02		B	B	B
9.00	28.61			S
10.00	31.79		B	B	B
11.00	34.97		B	B	B
12.00	38.15		B	B	B
13.50	42.92		B	B	B
15.00	47.69		B	B	B
17.00	54.05			B	B
19.50	62.00			B	B
22.00	69.95		B	B	B
25.00	79.49			B	B
28.00	89.02			B	B
31.50	100.15		B	B	B
35.00	111.28		B

Choosing and fitting

Nozzles of this type are selected by matching the flow rate, spray angle, and spray pattern to the burner manufacturer's specification. The mounting thread and nozzle body dimensions must also match the nozzle holder on the burner. Before ordering, compare the existing nozzle's markings and physical size with the replacement. Installation requires correct seating and tightening to the specified torque to avoid leakage or poor atomisation.

Signs of failure

Nozzles of this kind can become clogged, worn, or damaged, leading to poor atomisation and incomplete combustion. The burner may show a smoky flame, soot deposits, or difficulty in maintaining a stable flame. A blocked or worn nozzle can also cause delayed ignition or pulsating combustion. Check the nozzle for debris, wear on the orifice, and correct spray pattern when these symptoms appear.