Danfoss Oil nozzle 6.00GPH,80S 030F8152
SKU 030F8152
Brand Danfoss
Photos
no photo yet
—price on request
on order
shipping calculated at checkout
- Worldwide shipping from stock
- Original manufacturer part
- Dispatch within 24 h for stocked items
Description
This is a Danfoss oil nozzle with a rated flow rate of 6 GPH, a spray angle of 80 °, and an S spray pattern. It is used in oil burners to atomise fuel oil into a fine spray for combustion. The 80 ° angle defines the shape of the spray cone, and the S pattern denotes the specific spray distribution. The nozzle carries the SKU 030F8152.
Nozzle selection chart
| Flow rate | kg/h | 30° | 45° | 60° | 80° |
|---|---|---|---|---|---|
| 0.30 | 0.95 | HS | HS | ||
| 0.35 | 1.11 | S | S | ||
| 0.40 | 1.27 | S | HS | HS | |
| 0.45 | 1.43 | S | S | HS | |
| 0.50 | 1.59 | S | S | HS | HS |
| 0.55 | 1.75 | S | HS | HS | |
| 0.60 | 1.91 | S | HS | BHS | BHS |
| 0.65 | 2.07 | BS | BHS | BHS | |
| 0.75 | 2.38 | S | BS | BHS | BHSSR |
| 0.85 | 2.70 | S | BHS | BHSSR | BHS |
| 1.00 | 3.18 | S | BS | BHS | BHS |
| 1.10 | 3.50 | S | HS | S | |
| 1.20 | 3.82 | S | HS | S | |
| 1.25 | 3.97 | S | BS | BHS | BHS |
| 1.35 | 4.29 | BS | BHS | BHS | |
| 1.50 | 4.77 | S | BS | BHS | BHS |
| 1.65 | 5.25 | S | HS | HS | |
| 1.75 | 5.56 | S | S | HS | S |
| 2.00 | 6.36 | S | BS | BHS | BHS |
| 2.25 | 7.15 | S | BS | BHS | S |
| 2.50 | 7.95 | S | BS | BHS | BS |
| 2.75 | 8.74 | BS | BHS | HS | |
| 3.00 | 9.54 | S | BS | BHS | BHS |
| 3.50 | 11.13 | S | S | S | |
| 3.75 | 11.92 | B | B | B | |
| 4.00 | 12.72 | S | S | S | |
| 4.50 | 14.31 | BS | BS | BS | |
| 5.00 | 15.90 | BS | BS | BS | |
| 5.50 | 17.49 | BS | BS | BS | |
| 6.00 | 19.08 | BS | BS | BS | |
| 6.50 | 20.67 | B | B | B | |
| 7.00 | 22.26 | S | |||
| 7.50 | 23.85 | B | B | B | |
| 8.00 | 25.44 | S | |||
| 8.50 | 27.02 | B | B | B | |
| 9.00 | 28.61 | S | |||
| 10.00 | 31.79 | B | B | B | |
| 11.00 | 34.97 | B | B | B | |
| 12.00 | 38.15 | B | B | B | |
| 13.50 | 42.92 | B | B | B | |
| 15.00 | 47.69 | B | B | B | |
| 17.00 | 54.05 | B | B | ||
| 19.50 | 62.00 | B | B | ||
| 22.00 | 69.95 | B | B | B | |
| 25.00 | 79.49 | B | B | ||
| 28.00 | 89.02 | B | B | ||
| 31.50 | 100.15 | B | B | B | |
| 35.00 | 111.28 | B |
Choosing and fitting
Nozzles of this type are selected by matching the flow rate, spray angle, and spray pattern to the burner manufacturer's specification. The mounting form and thread must match the nozzle holder, and the rated flow rate must correspond to the required firing rate. Before ordering, compare the markings on the existing nozzle with the required values.
Signs of failure
Nozzles of this kind commonly fail by clogging, wear of the orifice, or a distorted spray pattern. When this happens, the burner may show poor combustion, smoke, soot deposits, or an unstable flame. Check the nozzle for blockage or wear and compare the spray pattern with the specification.
All specifications
| Flow rate | 6 GPH |
|---|---|
| Spray angle | 80 ° |
| Spray pattern | S |
Part numbers
| SKU | 030F8152 |
|---|