Danfoss Oil nozzle 1.25GPH,30S 030F3124

Name: Danfoss Oil nozzle 1.25GPH,30S 030F3124
Brand: Danfoss
SKU: 030F3124

SKU 030F3124 Brand Danfoss

Brand Danfoss

Buy Danfoss Oil nozzle 1.25GPH,30S 030F3124

Key specifications

Flow rate	1.25 GPH
Spray angle	30 °
Spray pattern	S

all specifications (3) ↓

—price on request

Not in stock

shipping calculated at checkout

Delivery to 97 countries
Original manufacturer part
Dispatch within 24 h for stocked items

Choose a nozzle by its marks

Nozzles of different brands interchange when the marks match: Flow rate, Spray angle, Spray pattern. Set them as on the old nozzle — below are the ones that fit, with price and stock.

Danfoss Oil nozzle 1.25GPH,30S 030F3124

—on request

all results (1) →

Description

The Danfoss 030F3124 is an oil nozzle for pressure-jet oil burners. It meters fuel at a flow rate of 1.25 GPH. The spray leaves the orifice at a 30 ° angle. The spray pattern is type S, a solid cone. It is a wear part that is replaced during burner servicing.

Nozzle selection chart

Flow rate	kg/h	30°	45°	60°	80°
0.30	0.95			H S	H S
0.35	1.11			S	S
0.40	1.27		S	H S	H S
0.45	1.43		S	S	H S
0.50	1.59	S	S	H S	H S
0.55	1.75		S	H S	H S
0.60	1.91	S	H S	B H S	B H S
0.65	2.07		B S	B H S	B H S
0.75	2.38	S	B S	B H S	B H S SR
0.85	2.70	S	B H S	B H S SR	B H S
1.00	3.18	S	B S	B H S	B H S
1.10	3.50		S	H S	S
1.20	3.82		S	H S	S
1.25	3.97	S	B S	B H S	B H S
1.35	4.29		B S	B H S	B H S
1.50	4.77	S	B S	B H S	B H S
1.65	5.25		S	H S	H S
1.75	5.56	S	S	H S	S
2.00	6.36	S	B S	B H S	B H S
2.25	7.15	S	B S	B H S	S
2.50	7.95	S	B S	B H S	B S
2.75	8.74		B S	B H S	H S
3.00	9.54	S	B S	B H S	B H S
3.50	11.13		S	S	S
3.75	11.92		B	B	B
4.00	12.72		S	S	S
4.50	14.31		B S	B S	B S
5.00	15.90		B S	B S	B S
5.50	17.49		B S	B S	B S
6.00	19.08		B S	B S	B S
6.50	20.67		B	B	B
7.00	22.26			S
7.50	23.85		B	B	B
8.00	25.44			S
8.50	27.02		B	B	B
9.00	28.61			S
10.00	31.79		B	B	B
11.00	34.97		B	B	B
12.00	38.15		B	B	B
13.50	42.92		B	B	B
15.00	47.69		B	B	B
17.00	54.05			B	B
19.50	62.00			B	B
22.00	69.95		B	B	B
25.00	79.49			B	B
28.00	89.02			B	B
31.50	100.15		B	B	B
35.00	111.28		B

Choosing and fitting

Nozzles of this type are selected by matching the flow rate, spray angle and spray pattern to the burner and combustion chamber, and by matching the thread and seat to the nozzle holder. Mounting forms differ by body shape and by the sealing face, so the old nozzle is compared with the replacement before ordering. The nozzle is fitted with the correct wrench on the flats, without touching the orifice, and the holder is checked for a clean seat and a sound gasket.

Signs of failure

Nozzles of this type usually fail by orifice wear, which raises the flow rate, or by clogging and coking, which distorts the spray. The equipment then shows a smoky flame, soot on the boiler surfaces, a rough or pulsating fire, or failure to ignite. Check the spray pattern on a test stand, the pump pressure and the filter before replacing the nozzle.