Name: Danfoss Oil nozzle 0.75GPH,45B 030B0055
Brand: Danfoss
SKU: 030B0055

Flow rate

0.75 GPH

Spray angle

45 °

Spray pattern

Choose a nozzle by its marks

Nozzles of different brands interchange when the marks match: Flow rate, Spray angle, Spray pattern. Set them as on the old nozzle — below are the ones that fit, with price and stock.

Description

This is a Danfoss oil nozzle with a flow rate of 0.75 GPH, a 45° spray angle, and a B spray pattern. It is used in oil burners to atomise fuel oil into a fine spray for combustion. The nozzle's flow rate, spray angle, and spray pattern determine the shape and volume of the fuel spray delivered to the burner. The SKU for this item is 030B0055.

Nozzle selection chart

Flow rate	kg/h	30°	45°	60°	80°
0.30	0.95			H S	H S
0.35	1.11			S	S
0.40	1.27		S	H S	H S
0.45	1.43		S	S	H S
0.50	1.59	S	S	H S	H S
0.55	1.75		S	H S	H S
0.60	1.91	S	H S	B H S	B H S
0.65	2.07		B S	B H S	B H S
0.75	2.38	S	B S	B H S	B H S SR
0.85	2.70	S	B H S	B H S SR	B H S
1.00	3.18	S	B S	B H S	B H S
1.10	3.50		S	H S	S
1.20	3.82		S	H S	S
1.25	3.97	S	B S	B H S	B H S
1.35	4.29		B S	B H S	B H S
1.50	4.77	S	B S	B H S	B H S
1.65	5.25		S	H S	H S
1.75	5.56	S	S	H S	S
2.00	6.36	S	B S	B H S	B H S
2.25	7.15	S	B S	B H S	S
2.50	7.95	S	B S	B H S	B S
2.75	8.74		B S	B H S	H S
3.00	9.54	S	B S	B H S	B H S
3.50	11.13		S	S	S
3.75	11.92		B	B	B
4.00	12.72		S	S	S
4.50	14.31		B S	B S	B S
5.00	15.90		B S	B S	B S
5.50	17.49		B S	B S	B S
6.00	19.08		B S	B S	B S
6.50	20.67		B	B	B
7.00	22.26			S
7.50	23.85		B	B	B
8.00	25.44			S
8.50	27.02		B	B	B
9.00	28.61			S
10.00	31.79		B	B	B
11.00	34.97		B	B	B
12.00	38.15		B	B	B
13.50	42.92		B	B	B
15.00	47.69		B	B	B
17.00	54.05			B	B
19.50	62.00			B	B
22.00	69.95		B	B	B
25.00	79.49			B	B
28.00	89.02			B	B
31.50	100.15		B	B	B
35.00	111.28		B

Choosing and fitting

Nozzles of this type are selected by matching the flow rate, spray angle, and spray pattern to the burner manufacturer's specification. The mounting thread and nozzle body dimensions must also match the nozzle holder on the burner. Before ordering, compare the existing nozzle's markings and physical size with the replacement. Installation typically involves unscrewing the old nozzle from the holder and fitting the new one with the correct torque, ensuring the sealing surfaces are clean.

Signs of failure

Nozzles of this kind can become clogged, worn, or damaged, leading to poor atomisation. The burner may then produce a smoky flame, fail to ignite, or run erratically. A blocked or worn nozzle can also cause increased fuel consumption or a pulsating flame. Check the nozzle for debris, wear on the orifice, and correct spray pattern when these symptoms appear.