Name: Danfoss Oil nozzle 2.50GPH,80B 030B0215
Brand: Danfoss
SKU: 030B0215

Flow rate

2.5 GPH

Spray angle

80 °

Spray pattern

Description

This is a Danfoss oil nozzle with a flow rate of 2.5 GPH, an 80° spray angle, and a B spray pattern. It is used in oil burners to atomize fuel oil into a fine spray for combustion. The 2.5 GPH rating defines the volume of oil delivered per hour at a specified pressure. The 80° angle determines the width of the spray cone, and the B pattern indicates a solid or semi-solid spray distribution. The SKU for this item is 030B0215.

Nozzle selection chart

Flow rate	kg/h	30°	45°	60°	80°
0.30	0.95			H S	H S
0.35	1.11			S	S
0.40	1.27		S	H S	H S
0.45	1.43		S	S	H S
0.50	1.59	S	S	H S	H S
0.55	1.75		S	H S	H S
0.60	1.91	S	H S	B H S	B H S
0.65	2.07		B S	B H S	B H S
0.75	2.38	S	B S	B H S	B H S SR
0.85	2.70	S	B H S	B H S SR	B H S
1.00	3.18	S	B S	B H S	B H S
1.10	3.50		S	H S	S
1.20	3.82		S	H S	S
1.25	3.97	S	B S	B H S	B H S
1.35	4.29		B S	B H S	B H S
1.50	4.77	S	B S	B H S	B H S
1.65	5.25		S	H S	H S
1.75	5.56	S	S	H S	S
2.00	6.36	S	B S	B H S	B H S
2.25	7.15	S	B S	B H S	S
2.50	7.95	S	B S	B H S	B S
2.75	8.74		B S	B H S	H S
3.00	9.54	S	B S	B H S	B H S
3.50	11.13		S	S	S
3.75	11.92		B	B	B
4.00	12.72		S	S	S
4.50	14.31		B S	B S	B S
5.00	15.90		B S	B S	B S
5.50	17.49		B S	B S	B S
6.00	19.08		B S	B S	B S
6.50	20.67		B	B	B
7.00	22.26			S
7.50	23.85		B	B	B
8.00	25.44			S
8.50	27.02		B	B	B
9.00	28.61			S
10.00	31.79		B	B	B
11.00	34.97		B	B	B
12.00	38.15		B	B	B
13.50	42.92		B	B	B
15.00	47.69		B	B	B
17.00	54.05			B	B
19.50	62.00			B	B
22.00	69.95		B	B	B
25.00	79.49			B	B
28.00	89.02			B	B
31.50	100.15		B	B	B
35.00	111.28		B

Choosing and fitting

Nozzles of this type are selected by matching the flow rate, spray angle, and spray pattern to the burner manufacturer's specifications. The mounting thread and sealing face must also match the nozzle adapter or burner head. Before ordering, compare the existing nozzle's markings and physical dimensions with the replacement. Installation requires checking the electrode position and ensuring the nozzle is tightened without damaging the sealing surface.

Signs of failure

Oil nozzles of this kind can fail due to clogging, wear of the orifice, or damage to the sealing face. When clogged, the burner may produce a weak or uneven flame, delayed ignition, or excessive smoke. Wear can cause an increase in flow rate, leading to rich combustion and soot deposits. Check for fuel pressure, filter condition, and nozzle alignment when these symptoms appear.