Name: Danfoss Oil nozzle 1.20GPH,60S 030F6923
Brand: Danfoss
SKU: 030F6923

Key specifications

Flow rate

1.2 GPH

Spray angle

60 °

Spray pattern

Body material

brass

Net weight

0.03 kg

Gross weight

0.032 kg

Fuel

Liquid fuel

Application - Oil burners

oil burners

Shape

conical

Safety valve

Nozzle type

od s

Maintenance requirement

replace periodically

Filter type

sinter

Function - fuel spraying

fuel atomization

all specifications (14) ↓

Choose a nozzle by its marks

Nozzles of different brands interchange when the marks match: Flow rate, Spray angle, Spray pattern. Set them as on the old nozzle — below are the ones that fit, with price and stock.

Description

This brass oil nozzle is rated at 1.2 GPH (1.2 gallons per hour) and produces a solid, conical spray pattern. It is designed for fuel atomization in oil burners and is made as a conical shape from brass. The nozzle has a sintered filter and does not include a safety valve. Net weight is 0.03 kg and gross weight is 0.032 kg.

Nozzle selection chart

Flow rate	kg/h	30°	45°	60°	80°
0.30	0.95			H S	H S
0.35	1.11			S	S
0.40	1.27		S	H S	H S
0.45	1.43		S	S	H S
0.50	1.59	S	S	H S	H S
0.55	1.75		S	H S	H S
0.60	1.91	S	H S	B H S	B H S
0.65	2.07		B S	B H S	B H S
0.75	2.38	S	B S	B H S	B H S SR
0.85	2.70	S	B H S	B H S SR	B H S
1.00	3.18	S	B S	B H S	B H S
1.10	3.50		S	H S	S
1.20	3.82		S	H S	S
1.25	3.97	S	B S	B H S	B H S
1.35	4.29		B S	B H S	B H S
1.50	4.77	S	B S	B H S	B H S
1.65	5.25		S	H S	H S
1.75	5.56	S	S	H S	S
2.00	6.36	S	B S	B H S	B H S
2.25	7.15	S	B S	B H S	S
2.50	7.95	S	B S	B H S	B S
2.75	8.74		B S	B H S	H S
3.00	9.54	S	B S	B H S	B H S
3.50	11.13		S	S	S
3.75	11.92		B	B	B
4.00	12.72		S	S	S
4.50	14.31		B S	B S	B S
5.00	15.90		B S	B S	B S
5.50	17.49		B S	B S	B S
6.00	19.08		B S	B S	B S
6.50	20.67		B	B	B
7.00	22.26			S
7.50	23.85		B	B	B
8.00	25.44			S
8.50	27.02		B	B	B
9.00	28.61			S
10.00	31.79		B	B	B
11.00	34.97		B	B	B
12.00	38.15		B	B	B
13.50	42.92		B	B	B
15.00	47.69		B	B	B
17.00	54.05			B	B
19.50	62.00			B	B
22.00	69.95		B	B	B
25.00	79.49			B	B
28.00	89.02			B	B
31.50	100.15		B	B	B
35.00	111.28		B

Choosing and fitting

To choose a replacement of this kind, match the flow rate, spray angle, spray pattern, and thread type to the original nozzle or to the burner manufacturer's specification. The nozzle can be mounted directly on the oil pump or on the nozzle line downstream of the solenoid valve. Most domestic and commercial burners use a 1/8” BSP or UNF thread, so verify the thread on the nozzle holder before ordering. Always handle the new nozzle with care to avoid damaging the orifice.

Signs of failure

A worn or incorrectly selected nozzle can cause sooting, pulsation, or unstable ignition during burner operation. Over time the orifice erodes, which changes the flow rate and degrades fuel atomisation. If these symptoms appear, check the nozzle condition and confirm that its rating, spray angle, and pattern match the burner specification.

All specifications